Search

the plastic piece holds the front cover to the electrical box together. you remove those two tabs and slide the water sheild away to get to the ECU etc.

https://www.4-tecperformance.com/index.php?main_page=product_info&cPath=350_78&products_id=2559

Here's the link. You can purchase through the greenhulk store.

coupon code: greenhulk for 10%...

reminds me of the riva website lol

looks easier to find stuff thought. good work

I may have a few also but wont be able to check/ count the teeth until next week when I go to the ski.

The wedge give an extra 2degrees bow lift

yeah I was gona play with the pump area to see if can get some free rpms/speedout of it. im gona try using the T between the vacuum line for a little more boost. thanks for that info!

Check the battery and the connections to the battery.

I had this same problem but it will hunt to 2500 rpms. Replaced throttle body then all worked as normal. Hope that helps

To bring your rpms from 7500 to 7750 you are only going to get 1-2mph max. Your altitude is hurting your performance and the FZR hulls are faster than the FX hulls. What is the top speed of your FZR?...

I think I will turn it up to 19psi then play with the pump area and see where my rpms are too. Dont wana go over 8500 on stock retainers haha this thing pulls like a freight train lol

got the 79mph run up. I know I can get more speed out of It with more rpms and a jims cut on my plate. not sure if i want to depitch prop or add more boost :facepalm::D#-oHAHA

...

had problems with my wastegate dumping on 4psi and timing was off one tooth on both cams.
but after i resolved those problems i went for a run and got a gps speed of 71mph at 7k rpms. I know I still...

Bump for excellent seller. Fast shipping also

This is what u will need:

https://www.4-tecperformance.com/index.php?main_page=product_info&cPath=16_82_96&products_id=942&zenid=jc0ssltjf1cu8i45tutfv374u0

You can shop here in the greenhulk...

Here's the link for ride plates done by Jim.

https://www.4-tecperformance.com/index.php?main_page=index&cPath=78

Here they are in the "how to" section

http://greenhulk.net/forums/showthread.php?t=130451

I like that supercharger lmao

I thought the SHO motors was 205hp and the svho are 260hp. I also heard that Yamaha also under rates their engines hp wise so they should be pushing more. don't take my words for it.....lol

79.2 mph at 8300rpms......

how did you prime the oil ?

+1 on the wear ring

add this

https://www.4-tecperformance.com/index.php?main_page=product_info&cPath=16_82_96&products_id=2479

exactly what happened to me and it destroyed my motec ecu :smt100 bought a vipec v88r3 now

http://www.greenhulk.net/forums/attachment.php?attachmentid=321690&d=1390404122

As of jerrys posted thread about 2014 fx svho (2016 I doubt its any different), if you get the 13/20 you will be...

lmao and im over here trying to just hit 82mph on an fx hull :facepalm:. nice speeds