Search

Type: Posts; User: fubellik77

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Sticky: hi, I have a msx140 of 2003 , I found several...

    hi, I have a msx140 of 2003 , I found several errors with the procedure led reading . but now I can not erase mistakes from emm following the procedure of the bridge ( when I disconnect and reconnect...
  2. I also tried to close the return and the fuel...

    Hi, the temperature sensor was OK, I did a test with pressure gauge connected to the fuel line and I found that when I accelerate to the maximum pressure drop to 0psi, the minimum pressure is 22psi,...
  3. Hi, the temperature sensor was OK, I did a test...

    Hi, the temperature sensor was OK, I did a test with pressure gauge connected to the fuel line and I found that when I accelerate to the maximum pressure drop to 0psi, the minimum pressure is 22psi,...
  4. Msx 140 2003

    Msx 140 2003
  5. what are the symptoms of the error 59 fuel pump overheated?

    has anyone ever had this problem? what are the symptoms?
  6. Emm led does not report an error, the pressure...

    Emm has the light and the water flows well, it could be the fuel pump, which heats up and crashes? Msx 140 2003[/QUOTE]Check fuel pressure. Should be about 23 PSI with engine running.

    See my...
  7. Emm has the light and the water flows well, it...

    Emm has the light and the water flows well, it could be the fuel pump, which heats up and crashes? Msx 140 2003
  8. [QUOTE = K447; 2450301] Se volete provare a...

    [QUOTE = K447; 2450301] Se volete provare a installare una resistenza da 1000 ohm come sostituto per il vero e proprio sensore di temperatura gas di scarico Polaris, utilizzare un resistore di...
  9. Can you tell me the wattage of the power system...

    The Evinrude 0586140 temperature sensor looks similar to the genuine Polaris 2410125 exhaust water temperature sensor but I do not know if it is close enough to be used as a substitute on the Polaris...
  10. My polaris is msx140 2003

    What model and year is your Polaris?[/QUOTE]

    My polaris is msx140 2003
  11. How does this sensor? Having a range from 990 to...

    How does this sensor? Having a range from 990 to 1015 ohms if I plug in the connector a resistance of 100​0 ohms what should happen?
  12. Can Ficht exhaust temp sensor 2410125 be replaced with Evinrude 0586140 ?

    Hi, I have a problem with the temperature sensor exhaust, can you tell me whether the component can be replaced with the spare Evinrude/OMC 0586140?

    Or are there other temporary solutions?
    ...
  13. Replies
    10
    Views
    1,518

    pn 9918121

    Is that a genuine Polaris published service manual or an independant service manual?

    Polaris manuals have a part number on the back cover, typically 99_______[/QUOTE]

    pn 9918121
  14. Replies
    10
    Views
    1,518

    w035303ca/cb manual. I thank you for the...

    Which service manual are you using?

    The switch is part of the 'Enhanced Steering Performance' (ESP) system. ESP is only on the Polaris MSX watercraft, it will not be found on the wiring diagram...
  15. Replies
    10
    Views
    1,518

    where is the connector on the main wiring harness...

    where is the connector on the main wiring harness to connect the Switch? I can not see near the steering column. thanks
  16. Replies
    10
    Views
    1,518

    I insert the image-component in the workshop...

    I insert the image-component

    in the workshop manual and the user manual does not specify this component

    325888
  17. Replies
    10
    Views
    1,518

    msx steering switch

    hi, you could explain to me what is the steering switch? mine is disconnected. thanks
  18. I also found these o-rings Viton replacement for...

    I also found these o-rings Viton replacement for the original injector, wonder if these measures may be okay:


    No. 2 internal 25.1 mm thickness 2.6 mm
    No. 3 internal 28.3 mm thickness 1.8 mm ...
  19. the previous owner bought the PwC as defective,...

    the previous owner bought the PwC as defective, it had a wiring problem emm. also replaced the piston and plated cylinder thinking to solve the problem, but the rpm did not increase.
  20. il precedente proprietario ha acquistato la PwC...

    Io non capisco queste cose. [/QUOTE] il precedente proprietario ha acquistato la PwC come difettosi, che aveva un problema di cablaggio emm. anche sostituito il pistone e cilindro placcato pensare di...
  21. the pwc I bought it used I never reached more...

    the pwc I bought it used I never reached more than 6300 rpm


    the previous owner bought the pwc as defective, it has settled after getting cable into the emm worn. also replaced the pistons and...
  22. polaris msx 140 ho 2003,how can I move the...

    polaris msx 140 ho 2003,how can I move the discussion?
  23. 2003 MSX 140 not reaching full RPM, seeping onto cylinder head

    I have no particular problems except a runny patina on the cylinder 1 and 2.

    Performance is 52/58 mph but can not go beyond 6300 rpm, the two things could be related?
  24. Replies
    76
    Views
    16,369

    thanks for the information, but if the previous...

    thanks for the information, but if the previous owners did not pay attention to the torque which can be the problems that ensue?
  25. Replies
    76
    Views
    16,369

    Good evening, sorry for the question but I need...

    Good evening, sorry for the question but I need to know the extent of the 'o-ring located between cylinder head and injector (the external one) thanks.
Results 1 to 25 of 34
Page 1 of 2 1 2