Search

Tip: Mark the positive battery terminal with red tape or paint.

http://greenhulk.net/forums/showthread.php?t=286216&p=3076200&viewfull=1#post3076200


...

Basically it is about proactive protection of the materials and surfaces along with thorough fresh water flushing and cleaning after riding. Hull interior, exterior, trailer, engine and jet pump,...

There are some differences, depending on the implementation.

For completeness, this is the EZ Lube single type you have on your trailer, correct?

You remove the Zerk fitting to allow the Bearing Buddy to fit properly onto the hub, correct?
...

A Ficht fuel injector is entirely different from a typical automotive fuel injector. A Ficht RAM fuel injector is actually a high pressure pulse driven fuel pump, powered by 45 the volt current...

Liquid fuel accumulated in the intake manifold?

Welcome.

The EMM may need repair.
Lakeside Tech can test/check the EMM and also do the repairs, if needed.

The EMM works the Ficht fuel injector by pulsing the ground connection. The...

Non-supercharged GP1800R HO or supercharged GP1800R SVHO model?

Note: The RXP is a Seadoo, not a Kawasaki Jet Ski

What brand and year PWC are you looking to have work done on?

Older watercraft, and especially the carburetor 2-stroke models, the number of shops that will work on them has lessened.

Recommending a PWC for someone else can be tricky. Our preferences and priorities are probably different from someone else. :-k

For ourselves we chose the 2017 GP1800 SVHO. We still like them very...

The fuel consumption varies depending on the hull, the water conditions and the rider.

The SHO engines seem to be thirstier than SVHO.

FX hull models tend to burn more than the lighter and...

What is the source for this data?

Do you have a photo zoomed out to see the damage context?

This is a hull located somewhere else that you are considering buying, correct?

Watercraft Journal has done reviews of the Yamaha EXR (link below) and the Yamaha EX.

https://watercraftjournal.com/budget-bottle-rocket-2019-yamaha-exr-waverunner/


You might find the EX...

You can mark the thread as SOLD.

Have you looked at the Yamaha EX and EXR models?

The paddle wheel sensor is a Hall Effect sensor. It is powered by a low current voltage source from the display. As the magnetized paddles pass the sensor the sensor changes resistance, creating a...

The 1999 X45 with 1200 carb red engine (aka SLTX-B) has the Gen III ignition.

It is possible the Hall Effect sensor for the MAG a cylinder is not working (= bad stator).
It is also possible the...

Supercharger volute pinning, 2013 through 2017 Yamaha SVHO engine

http://greenhulk.net/forums/showthread.php?t=265123&p=2888496&viewfull=1#post2888496

Was it powered by the Orange wire LR output? If the Orange output voltage from the LR module goes weak the voltage regulator output will also sag.

I suppose it is possible the stator Hall Effect...

What were you using?

Choose the hull first. Then the engine.

FX is a longer, wider and larger hull than the VX series.

VX and GP1800 are essentially the same hull, differing in deck layout, some features and...

Yamaha does not make an ‘unreliable’ model. In stock form all the engines and models are reliable. The 1.8 engine has the longest history and is very well regarded.

Modified, the Yamaha SVHO...

With the alternate 8 volt regulator installed, did you connect it to the Brown wire going to the stator AND the Brown wire going back to the CDI? Try the regulator with the CDI Brown wire entirely...