Search

I bet all it would take is some straight pipe and a 90 off the water tank. With some straight couplings.

Does anyone know if the 2021 transom plate is available yet or when it will be available?

Has anyone actually measured one to compare it to the 2020 and earlier version?

Im thinking this...

This is what I bought

http://greenhulk.net/forums/attachment.php?attachmentid=470544&stc=1

I use a 1/4 hex drive impact driver to spin bolts out after breaking them loose by hand.

While the large Garmin screens are nice the 4 inch screen models work just as well and can be had for about 300 bucks. The other upside of this is that you can set up the sonar for depth readings...

Why not switch to one of the echomap Garmin units and install it on your ski. There are so many more options available to these units and some are cheaper than the handheld versions.

I had thought of possibly wrapping the aluminum pipe for the rear exhaust kit to try and soften the exhaust tone some. That aluminum pipe is very resonant and probably adds to the noise factor. I...

Hi jay!!!!

Jay is the man for sure!!!!

https://www.millennium-tech.net/serviceInfo.php?id=15

This is for a 4 stroke head. But a 2 stroke head should be easier and cheaper.

I’m pretty sure millennium can fix that head. Did you tell them it’s a single piece head for 3 cylinders? I think they weld the damage and then use a cnc to machine the damaged head exactly like...

Use soapy water on the hull. Then you can slide the graphic around and position it exactly. Use an old credit card to squeegee the water out from under the decal. Let it sit a day to fully adhere.

This is exactly what I did. On one machine the nipple on the jet pump nozzle split while tapping it. Its thin cast aluminum so its easy to break it. So I cut it off and I tapped the nozzle casting....

I’m working on this now. I have purchased an analog to NMEA 2000 converter. I should be able to tap into analog sensors to display any data I want.

So far my plan is for engine rpm, fuel level,...

With a catch can or breather mod any oil that does go to the breather won't end up in your intercooler. When I had the breather hose connected to my Riva intake I had enough oil in the tube that it...

Iseem to remember buying 91 octane fuel on the water there last summer when I was there

it can still spin only one way and be bad. It may be slipping when trying to make boost. Definitely check all the hose connections if they are all good then I’d still suspect the clutch

He’s on facebook. I think his name is Juan santos

I wouldn’t be surprised if they could be modified to fit.

i just got a replacement clutch from my dealer and it was the old version. I was hoping for the new one

Polaris made a reverse kit for the 96 SL 900. I had a kit here. I’m sure the parts could be adapted. But there’s no way it could be actuated with a finger unless the reverse was electrically...

who uses an engine cover?

If you don’t already have a copy of the factory service manual get one and read through the engine removal procedure. The best advice I can give is to have a long 5mm ball end hex wrench for a 3/8...

Nice that you don't have to deal with nuts on the back side to take that off. I see threaded inserts in there.

K line is correct. I contacted Candoo and they confirmed that for me. They are able to read that data for their diagnostic software and so can the maptuner setup. Unfortunately I need someone...