Search

ecu causes gas in oil with that motor common.

Hello everyone i did a stage 1 plus on a 2019 fxsvho and was only getting 73 mph. at 8000 rpm then pitch impeller to get more rpm gained a little. So looked at it further to see why checked...

Just letting everyone know i am getting a lot of PM'S and calls from people saying ‘I bought a used plate that you modded and have concerns about it’.

I tell them to send pictures and not even...

just letting everyone know i am getting a lot of PM'S and calls from people saying i bought a used plate that you modded and have concerns about it. I tell them to send pictures and not even close...

remove valve cover look to make sure no cam plugs came out have seen many do the same thing. cause a warning wide open throttle.

awesome numbers Gus

Ebay

with a same speed FZR or GP 1800 the FX would be able to kill them in the rough.

one thing is that ski is not lose that ski is locked down there is only one cut for the fx plate. That ski would be a killer in the rough with the fx platform.

low 9's not super crazy.

i did all the work that is a stock wheel 100% unless Dave changed wheels from this morning after picking up ski and going straight to the lake.

yep

the older gp 1800 had a factory reinforcement but were the pump shoe inserts were it was cut out they just sat flush with hull use to tend to crack the area. Now on the 2019 the reinforcement is all...

on the 2019 gp1800r yamaha took care of the problem with the hull cracking by the pump shoe inserts.

I had the same thing about 2 months ago, he had it at another shop could not figure out then brought to me we checked every sensor and ecu and everything checked good we were trying to fix it for a...

had a customer bring his new 2019 fx svho to mod the plate on his ski. the day before he gps it at 68.1 mph. with 10 hours on it, all we did to it was mod the plate and that was it he took it out the...

blue intake, pink exhaust

Fizzle all the way.

the stock sv injectors flow 660cc more than enough, i would not put 1000cc injectors for stock wheel.

Congrats Dave ski is flying =D>=D>, Yes you want to get the afr's about 11.8

most of time when there is a leak in mid shaft it is not bearing and seals. It is the rubber coming apart from housing. Might want to check it.

No when putting a pump seal kit you have to cut the flat part out of the stock one a use that.
When leaving that out water rushes up between there and causes drag.

http://partsfinder.onlinemicrofiche.com/4tec/showmodel.asp?Type=13&make=yamahapwc&a=239&b=19&c=0&d=2015%20FX%20SVHO%20[FC1800P]%20INTAKE%20AND%20RIDE%20PLATE%20ASSY
Should not on a fx should have ...

There should be no i told you so. In the heat of the moment everyone has posted something they regret later, i know i have. By what you just posted it shows what good character you have. Thank you

Yep looks like a hair line crack.