Search

No Instructions on the backing. It is adhesive glue on the back of the label though.

Thanks. Just to be clear, you also coat the surface with soapy water first then position the decal on the hull.

So pull the backing page off with the glue/adhesive exposed and place with soapy water. The adhesive will then stick once water and soap dries?

Hello, I am restoring a 96 Hurricane and 96 SLTX. I have some new OEM (3M) stickers for both skis, but of course, they are 24+ years old now.

Is there any trick to applying them due to their age?...

http://greenhulk.net/forums/attachment.php?attachmentid=468940&stc=1http://greenhulk.net/forums/attachment.php?attachmentid=468941&stc=1http://greenhulk.net/forums/attachment.php?attachmentid=468942&s...

http://greenhulk.net/forums/attachment.php?attachmentid=468931&stc=1http://greenhulk.net/forums/attachment.php?attachmentid=468932&stc=1http://greenhulk.net/forums/attachment.php?attachmentid=468934&s...

Hey CliffsidePM, let me know if you want to sell it. Also looking for 1341193 bearing carrier. Came on 1997 Hurricanes

Don't know about the originals as mine were missing when I bought the ski. The new ones hold well though. And for $10/pr, not that big of risk to try

Just got one from michaeltash2.

PM sent

Looking for a ride plate for a Polaris Hurricane. Condition is not critical. Going to cut it up for an extension on my stock one.

Parting a 2004 MSX140

Engine is currently spoken for
Harness, magneto, flywheel are available (no EMM or sensors)
Cowl is available but previous owner spray painted parts.
Handle bars available...

QC10PEP

Well thankfully it was something simple. I purchased and downloaded the PDF manual and read through it.

Found 2 things wrong.
1. Checked the plugs and they were the wrong ones. Put the Champion...

http://greenhulk.net/forums/attachment.php?attachmentid=467726&stc=1http://greenhulk.net/forums/attachment.php?attachmentid=467727&stc=1http://greenhulk.net/forums/attachment.php?attachmentid=467728&s...

Haha. I know but why not make it and keep it simple if you have all the parts on hand?

I work on German cars as a hobby and swapped TDI's into quite a few that were gassers. The fuel injection and...

Thanks. Will check with Lakeside Tech. Did check compression and have 140-145 acorss all 3.

May just make it simple and put the carb'd 1200 I have in it. LOL

Hello, picked up a 2004 MSX140 over the weekend. When I orginally looked at it, it did run but was really rough and backfired a few times.

Got it home and now it will turn over, but appears it is...

So looking at a 110. I work on VW/Audis a lot and have the VCDS Vagcom cable. It can read both CAN and K-line. I have a few VW harnesses laying around that I can grab a female OBD connector from. Can...

My son is selling his 96 Yamaha Wave blaster. 760 twin carb. Runs great. Has great compression. Just went through the carbs. Installed a primer. Very reliable and fun ski.

It's not a beauty queen...

Thanks. I knew the 110/140 are 4 stroke, but do they mount differently or in different places in the hull than the 140? If yes that would push me to the 140

Hello all, d
id a search of 1200 carb'd conversions but nothing recent pops up.

I have a running 2000 Virage TX that I picked up but has no title so that engine/harness needs a new home. Recently...

Yep, the part assembly #'s are different, but it appears that the part # stamped on both of my pipes are 1260698 Rev 3. I say appears as it looks like the 8 on one of the pipes could be a 9. The...

How does moving the cooling hose lower help RPM's? Does it allow the exhaust expand and exit easier?

I just checked the 2 pipes I have. One from the Hurricane and one from a 2003 Virage. Both have the exact same part # and rev # stamped on the side but the Hurricane has the small cooling hose at the...