Search

The 1999 X45 with 1200 carb red engine (aka SLTX-B) has the Gen III ignition.

It is possible the Hall Effect sensor for the MAG a cylinder is not working (= bad stator).
It is also possible the...

Supercharger volute pinning, 2013 through 2017 Yamaha SVHO engine

http://greenhulk.net/forums/showthread.php?t=265123&p=2888496&viewfull=1#post2888496

Was it powered by the Orange wire LR output? If the Orange output voltage from the LR module goes weak the voltage regulator output will also sag.

I suppose it is possible the stator Hall Effect...

What were you using?

Choose the hull first. Then the engine.

FX is a longer, wider and larger hull than the VX series.

VX and GP1800 are essentially the same hull, differing in deck layout, some features and...

Yamaha does not make an ‘unreliable’ model. In stock form all the engines and models are reliable. The 1.8 engine has the longest history and is very well regarded.

Modified, the Yamaha SVHO...

With the alternate 8 volt regulator installed, did you connect it to the Brown wire going to the stator AND the Brown wire going back to the CDI? Try the regulator with the CDI Brown wire entirely...

BRP stopped making the boats circa 2013, but made their 4-Tec engine and jet pump packages available to other boat builders.
...

For the EMM, Lakeside Tech.

http://www.greenhulk.net/forums/showthread.php?t=268057&p=2917494&viewfull=1#post2917494

Be aware that Seadoo stopped making ‘boats’ years ago and sold the boat stuff to another company.

Boat specific BRP parts are often expensive and hard to find, sometimes not available at all.
...

I am not familiar with the production scheduled BRP used for these.

BRP might have started 2015 model production in late 2014, built up warehouse inventory and start shipping them to dealers in...

C5 = March 2015

What are the last four digits in your HIN number plate?

The very last two HIN digits are the model year.

The two prior are the month and year of actual manufacture.

Perhaps yours was made...

One price for all of it.

I have no idea whether the circuit boards work, nor which MFD part numbers they are from.

I bought the replacement decals for the oval MFD from somewhere, look like...

This thing;
http://greenhulk.net/forums/showthread.php?t=68431&p=754139&viewfull=1#post754139

Been sitting in this box for a while. I assume it still works but I have not tested it.

Sold as...

Years ago I had a Garmin 76 size model. The postage stamp screen was impossible to read at speed and showed far too little detail when zoomed out to show where I was going, and when zoomed in to see...

You probably should be looking at 4-stroke engines from a brand that is still making PWC. My own preference is Yamaha.

Unclear why this post was not refuted earlier. My bad, I suppose.

Lakeside does excellent EMM repair work. Darrin has developed multiple Ficht EMM specific repair methods, researched and refined...

How much money are you willing to spend getting them into reliable and good running condition?

Assume each needs EMM repair.
Plus the fuel pump regulator reinforcements.

All the original...

Last I heard that division of PVL had gone into bankruptcy or had ceased production of those old-school CDI ignition products. I have not verified whether this is accurate.

Apparently a few...

I posted some info in your other thread.
http://greenhulk.net/forums/showthread.php?t=291126&p=3112657&viewfull=1#post3112657

Hours do not matter much on a twenty year old watercraft.

Current condition and potential repair difficulty and repair costs matter more.

There are several common problems with Polaris Ficht...

I will mention that with stainless steel bolts and screws, especially the medium to smaller sizes, a power impact tool can twist the bolt head or snap the nut clean off using impact power.

Or...

Apparently nobody does anymore. :(
The last of mine were sold a year or two ago.

There is a workaround by retrofitting a non-pigtail (available from non-Polaris sources) TPS equivalent. Tricky...

Stock, there is just normal full power mode and Learner (power/speed limited) modes.

Normal mode on Yamaha is equivalent to Seadoo Sport mode.

Engine will start and run in whichever mode it...