Search

Page 1 of 16 1 2 3 4

Search: Search took 1.00 seconds.

  1. Finger pressure on the supercharger blades.

    Finger pressure on the supercharger blades.
  2. Replies
    45
    Views
    4,530

    The topic of laying up a PWC draws a lot of...

    The topic of laying up a PWC draws a lot of opinions because there are so many variables and no way to test the outcome so people do what they feel "good" about doing.

    Here's my opinions:...
  3. Replies
    7
    Views
    429

    Ya, you never know if a bit of the intercooler...

    Ya, you never know if a bit of the intercooler broke off and is stuck on a valve seat

    You could also put a teaspoon of motor oil in #1 to see if there is any improvement, which would point to...
  4. Replies
    7
    Views
    429

    Before taking it apart I would highly recommend...

    Before taking it apart I would highly recommend doing a leak down test. That will tell you if your issue is in the valves not seating properly, or if it's piston/rings.
  5. 2018 ST3 Hulls it appears shared the part number...

    2018 ST3 Hulls it appears shared the part number until the change in July 2020. RXP had different part numbers from the RXT/GTX in 2018-2020. The new RXP also has a different part number from the...
  6. Replies
    5
    Views
    243

    Not sure, I can see the thumbnail of the YouTube...

    Not sure, I can see the thumbnail of the YouTube clip.

    Also while you did tell my to do my own searches for info via your signature, frustrating at the time because I was after answers the wealth...
  7. Replies
    5
    Views
    243

    9 years in the making

    List of things that went wrong over the last 9 years of getting this engine goin.

    Faulty tps
    Sent emm away for assessment, ended up at the guy that likes rtv instead of the gel
    EMM sent to...
  8. Notes from Riva: All of the tunes listed in...

    Notes from Riva:

    All of the tunes listed in the system when you are logged in for your Yamaha are "legitimate" tunes for your model.

    Each tune has its own list of required modifications for it...
  9. Replies
    10
    Views
    705

    Bypassing the ESP feature fixed both of them....

    Bypassing the ESP feature fixed both of them. Thanks for the tip everyone. I forgot about this feature on the MSX skis.
  10. Replies
    6
    Views
    422

    As the post above…make sure the hose did not pop...

    As the post above…make sure the hose did not pop off intake manifold.
  11. 2” pvc pipe. Not too long though. Works like a...

    2” pvc pipe. Not too long though. Works like a charm
    My wrench was too thick to use metal pipe over it. And yes, i noticed these sounds, even though I smacked that b@&c so fast and hard it did not...
  12. Replies
    6
    Views
    1,290

    I can offer a little bit of info, at least on the...

    I can offer a little bit of info, at least on the early rod bearings. I just rebuilt a blown engine with front piston and head damage out of a recently purchased 2018 GP1800. This was my first time...
  13. Do NOT use the torch!

    Do NOT use the torch!
  14. Replies
    25
    Views
    853

    It appears you have an open stator section. This...

    It appears you have an open stator section. This would coincide with the previous symptoms you reported.

    The only thing that is powered from the 12 volt battery system, on a Direct Injected (DI)...
  15. Replies
    10
    Views
    543

    No, your problem has nothing to do with phantom...

    No, your problem has nothing to do with phantom codes or anything like that, you have an overheating issue, or a bad temp sensor. If you’ve changed all the sensors with no change in the symptom, it...
  16. Link that you sent me is perfect. Thanks

    Link that you sent me is perfect. Thanks
  17. Replies
    11
    Views
    324

    Your were right. I got my 5 power jeweler's...

    Your were right. I got my 5 power jeweler's glasses on, and saw that down inside (beyond that little slot you circled) there is indeed a little tab that flexes back away from the terminal in the...
  18. Replies
    17
    Views
    753

    Even though I feel like I’m responding to myself...

    Even though I feel like I’m responding to myself lmao I’m getting back as I said the Polaris did it’s thing my girls had a blast everything worked out great looks like I purchased a nice ski it’s...
  19. Replies
    22
    Views
    1,485

    There are 3 tabs on the transom 2 on the top and...

    There are 3 tabs on the transom 2 on the top and 1 on the right hand side and basically 3 on the back of the hull. So the transom needs to be up and to the right touching (or very close to touching)...
  20. Replies
    6
    Views
    309

    I really like Legend ZX-2 oil for my 2 strokes.

    I really like Legend ZX-2 oil for my 2 strokes.
  21. This is the wiring I ended up with the get it to...

    This is the wiring I ended up with the get it to run with pin and color code call outs:

    http://greenhulk.net/forums/attachment.php?attachmentid=477387&stc=1
  22. Sticky: 1100 STX Di Ficht Fuel Injector online barcode decoder

    Hey guys

    I found an online Data Matrix online decoder that will take an image and decode the 4 coefficients for you.

    https://products.aspose.app/barcode/recognize.

    I hope this helps...
  23. Replies
    2
    Views
    373

    MSX110/150 - PPU aftermarket discussion

    The Pedal Position Unit (PPU) on the Weber engine in the MSX 110 and MSX 150 is the item that takes the movements from the handlebar throttle lever (ie the "pedal") and converts them to an electrical...
  24. Never mind! Did some more digging and found this....

    Never mind! Did some more digging and found this. Posting document for anyone else reading through. http://greenhulk.net/forums/attachment.php?attachmentid=476632&stc=1
  25. Replies
    8
    Views
    766

    I've experienced the tippy-ness at idle speeds...

    I've experienced the tippy-ness at idle speeds too, this was not that.

    So when you ask what exactly what I was doing, I'd have to say "I'm not 100% sure".

    It was one of those scenarios -- that...
Results 1 to 25 of 400
Page 1 of 16 1 2 3 4