Search

I didn't call you an idiot. I use google translate, so the meaning of my messages is not conveyed correctly. your starter must always cling to the flywheel, it does not. and if it slips when there...

I'm of course sorry and I'm from Russia. but what are you doing? you twist your hand when the candle is installed and show us that it stops, it is clear to the idiot that it stops, because there is...

what was the point of shooting visible with the head removed? you still haven’t answered when the engine does not turn with the starter with the spark plug installed, can you turn it by hand?

I will write again that in case of a problem with the cylinder, you would not have a starter spinning, but in the video you have it spinning. if the starter is spinning, then the bendix is spinning....

judging by the sound in the second video, the bendix does not catch on the flywheel. this means that the bendix is ​​not fast enough to open. try connecting the plus directly to the starter.
if...

http://turbomaxx.free.fr/GP1200R/LIT-18616-02-15.pdf

By analogy with a car, you need to use all the electrical wires from the old motor and rearrange them to the new one.all wires and control box from the new motor do not need to be used.

what's the difference what its specification is? the engine is the same. do as indicated on the forum.

thanks for the answer. the only thing I didn't check was the fuel cock. next season I will plug the hoses bypassing it.

how are you going to use the 80mm piston on Nikasil? what number is written on your cylinder responsible for its size? the clearance should be written in the instructions for that piston. I think...

That's why I asked this question. can the pressure differ when checking with the assembled pump? I've always checked everything assembled and ended up running out of fuel. is it possible that I...

http://greenhulk.net/forums/showthread.php?t=290476&page=2&highlight=Pop-off
read this thread. it says that it is impossible to measure pop off with an installed fuel pump

if the resistance is the same, then everything is in order with him. I am engaged in the sale of this type of parts. your problem is different. when you turn on the ignition it will move a little...

thanks for the answer. yes I know all this. done. problem if I use spring 95 then the pop-off will be only 30. and if I use 115 the spring pop-off will be 40. that's why I'm asking about the...

Hello everyone. and so my problem is due to lack of fuel. I recently read on the forum that the pressure of the pop off should be measured with the pump removed, that is, apply pressure directly to...

As a spark owner I often read forums, there is an official spark forum. and he has one factory problem - a crookedly installed engine, which subsequently cuts off the splines of the crankshaft or...

I would be looking for a stock standing jet ski. it doesn't matter if it's kawasaki or yamaha. starting from 700 cubes. I bought an fx700 (fx1) last year, this year I will try it for the first...

http://greenhulk.net/forums/attachment.php?attachmentid=470558&stc=1
Hello everyone. there are three original nikasil cylinders available. located in Russia. paypal, write to me for shipping...

as far as I know this piece should not be there. And if you are planning to make a free exhaust, I would not advise you.

I think it's better to buy a stock jet ski. for this money you can make the tuning you want yourself. If you have no experience with such a jet ski, why would you need such a powerful one?

hi have you tried moving the choke lever when driving?

I support. this place does not affect the operation of the engine, they are lower than the intake windows, I would suggest not wasting money now.

to begin with, I would take off the carburetors and see which jets are installed there, which needle saddle. I would leave the fuel pumps not original.

http://greenhulk.net/forums/showthread.php?t=177671
about the clearance 0.007. it only affects compression, nothing else. check whether you have made this mod or not.

I would advise you to make a return line mod. this will save you from piston burnout. and you have problems with carburetors.