Search

Type: Posts; User: tiderider

Page 1 of 8 1 2 3 4

Search: Search took 0.02 seconds.

  1. The Faulty CP Piston.. Corrected by filing it...

    The Faulty CP Piston.. Corrected by filing it down very slightly. Rings were stuck and would not spin freely.. Very tight clearances!
  2. I also replaced the cam sprocket bolts with 12.9...

    I also replaced the cam sprocket bolts with 12.9 bolts, blue Loctite and torque to 16 nm.
  3. I am reusing the timing chain, it only has 40...

    I am reusing the timing chain, it only has 40 hours on it, its a newer IWIS chain and it was inspected with no wear on it, just like new. Knock on wood. Cam sprocket markers are leveled with the...
  4. As per Torco. "The Torco MPZ assembly lube is...

    As per Torco.

    "The Torco MPZ assembly lube is designed for exactly what you are asking about. It works very well for engine assembly and you will have no issues on the new rings."

    I did have 1...
  5. Not sure if I'll be starting it up soon, perhaps...

    Not sure if I'll be starting it up soon, perhaps in 1 or 2 months.
    I'll be using Valvoline 10W40 motorcycle oil, synthetic. Probably change the oil after 10 hours as typical break in time for new...
  6. Hi, thank you for the info. I was able to adjust...

    Hi, thank you for the info. I was able to adjust the cam sprocket to your displayed setting. It really has 2 settings. I could have installed all 3 bolts with either setting. I'll leave it as the...
  7. Valvoline 4 stroke full synthetic Motorcycle oil...

    Valvoline 4 stroke full synthetic Motorcycle oil 10W40 works great. Walmart, great price.
  8. Adjusting Ignition timing from Cam Sprocket for ET137+4mm 60 injectors

    Engine is coming along with the rebuild. Going with the ET137+4mm 60 injectors setup again.
    Had an issue with 1 CP piston where the bottom oil ring channel by the wrist pin bore had a small...
  9. Spoke to Torco technical support and its a thumbs...

    Spoke to Torco technical support and its a thumbs up to using their MPZ assembly lube on piston rings.
  10. So it breaks in properly. What's the difference...

    So it breaks in properly. What's the difference between the assembly lube and fogging the engine for storage?
  11. Assembly lube for piston rings/inserting them.

    Installing the pistons and I have some Torco MPZ assembly lube kicking around. It states okay for cylinder walls, piston skirts. I guess it being around the expansion ring/oil ring shouldn't be a...
  12. CP pistons and Molnar connecting rods Balance

    Just got everything back from the machine shop and finished sorting out the total weights per cylinder with the CP coated pistons, Rings, Wrist pins and Molnar connecting rods.. Amazingly, I am...
  13. I am going to miss these oil threads when...

    I am going to miss these oil threads when electric takes over...
  14. I'm really scratching my head on this one. Just...

    I'm really scratching my head on this one. Just wondering if its logging engine noise, as in knocking/pinging? Thanks
  15. Replies
    8
    Views
    163

    Just to let you know that there is also another...

    Just to let you know that there is also another option, perhaps a better one. Fuelab offers a 6 micron Fiberglass 82833-1, comes with the choice of different AN male ends. 200 Psi max as well. Looks...
  16. MaptunerX Data logger displayed values description

    Hi, to the logger honchoes..
    Going through some logs before the big BOOM and noticed a few cells with vague descriptions. Cell- Acc X, Cell- Acc Y, Cell- Acc Z, Cell- NoiseLevel.

    What are these 4...
  17. Replies
    8
    Views
    163

    Thank you! Greatly appreciated! I am going...

    Thank you! Greatly appreciated!

    I am going with the aeromotive fuel filter!
  18. Replies
    8
    Views
    163

    I am going to confirm the 58psi capability.

    I am going to confirm the 58psi capability.
  19. Replies
    8
    Views
    163

    I couldn't help notice the filters condition when...

    I couldn't help notice the filters condition when I upgraded the fuel pump. It was in there for 12 years though. Heck if cars have them with 6500 rpm redline; Makes sense to have one on a 8000+rpm...
  20. Replies
    8
    Views
    163

    Inline fuel filter

    Hi, is anyone using an inline filter on their 4tecs if so what do you recommend? Couldn't help notice that the only filters on these engines are flimsy ones on the fuel pump bottom and in the pumps'...
  21. Replies
    4
    Views
    149

    Ignition timing is the one thing I do not know...

    Ignition timing is the one thing I do not know what they are. Riva is unable to provide me that table for the tune they gave me. They are unable to tell me what they are when the tune was created and...
  22. Replies
    4
    Views
    149

    I guess this following attached chart would be...

    I guess this following attached chart would be best except for a little lean from 6000 through wot with 94 octane? (Make it 12.9 through 11.9 in the 6k - wot range)? I will be running a decked head...
  23. Replies
    4
    Views
    149

    AFR tables Motec vs innovate

    Hi, found this comparison table of AFRs between Motec and Innovate gauges. What type of octane fuel and mods or boost levels are these AFRs ideal for? Thank you....
  24. Keep or send back.?

    Keep or send back.?
  25. Connecting rods Half Bearings... Quality Control issues??

    I just received some seadoo OEM half bearings for the connecting rods. I've replaced a few in the past but they looked so much better then these..! Keep them or send them back!? I can only see one...
Results 1 to 25 of 200
Page 1 of 8 1 2 3 4