Search

Type: Posts; User: K447

Search: Search took 0.11 seconds.

  1. Sticky: Yes, the LR-52 does function like a relay. In...

    Isn't the LR-52 (not all LR modules) just a marine grade sealed relay?
    It takes constant power (R/Pur), ground (BLK), trigger (Y) and outputs switched power (O) [ and R/W? ]

    I like the relay...
  2. Sticky: I would evaluate whether each switched 12 volt...

    Out of the main relay, there are a lot of "switched" 12v that the ECU turns on. Like the fuel pump, O2 sensor, coils, etc.. These all come on as the engine is starting. Would you use that as a...
  3. Sticky: I am not familiar with Weber electrical. If there...

    I am not familiar with Weber electrical. If there is an 'engine is running' 12 volt signal you might be able to use that directly, without any LR module at all.
  4. Sticky: So it also makes the ski faster!

    So it also makes the ski faster!
  5. Sticky: Good wire harness work does take time, not only...

    Good wire harness work does take time, not only to make it look good but be reliable over time.

    When I do one-off harnesses and such I sometimes label all the connectors and major sections. Mostly...
  6. Sticky: 8-)

    8-)
  7. Sticky: Precisely! The diode is needed so that when...

    Precisely!

    The diode is needed so that when the bilge pump is powered from the LR module the bilge pump voltage does not back feed into the display's mode input.

    With the diode in place the...
  8. Sticky: You got that machine running yet? I expect the...

    You got that machine running yet?

    I expect the bilge pump button works just fine for you, now that you have hooked up the engine ground :p
  9. Sticky: If you have a stock MSX 140 and want to retain...

    If you have a stock MSX 140 and want to retain the ESP feature, simply thread a new wire through the wire harness sleeving from the splice location near the hood hinge back to the bilge pump feed.
    ...
  10. Sticky: Modifying the wire harness; stealing a wire to...

    Modifying the wire harness; stealing a wire to extend the Mode button signal back to the electrical box.

    Since the MSXtreme does not have a fuel injected engine, it does not utilize the ESP...
  11. Sticky: Manual bilge pump button for MSX without Bilge button

    The MSX models do not have a bilge pump in stock configuration, and there is no Blige button on the handlebar.

    This modification was originally conjured up for Keddano's MSXtreme, which is based...
Results 1 to 11 of 11