Search

Wiggle the harness at the mpem. Had this happen yesterday. The big red wire in the front harness was not installed all the way in on the harness if and would occasionally turn ski off after wave...

Sorry to hear.

Take sparkplugs out and inspect them.

With plugs out put vise grips on driveshaft just in front of carbon ring top hat and see if you can spin the engine over by hand. It...

SOLD......
thanks G/H

This came off my speedster 150, 2008.
Works perfectly, only taken out to upgrade boat to 255 ecu.

Comes with key. You will need to marry your display in order to have boat turn on.

Should work...

I've been in contact with a couple of local shops and some people down here whom are supposed to be in the loop but no one can point me in the right direction.

I have a darton sleeved block with...

vous aurez besoin du carter de prise de force, du compresseur, du volant, des injecteurs, du capteur de pression d'air du collecteur pour le suralimentation, l'ordinateur, les pistons optimisés pour...

I have it done on my 2008 speedster. 08 up exhaust from a 2008 Rxp-X. The exhaust manifold on your engine stays the same. The 08 mid pipe with all the hoses and the water box itself is all that's...

Had that happen to me almost every time I pull a driveshaft off a seadoo 4tec. Never in two pieces but half way there. Have had oil leaks due to them walking away from each other. Just place them...

Sorry disregard. You need rxp parts. My bad [emoji2]

I have a complete steering from a non x rxt. With wiring and levers.
I have a glove box lid, yellow
I have a top lid red
Extra white storage container
Extra set of intercooler hoses
Extra rxtx...

All depends on maintenance done on engines. If boat look well taken care off and engine bay is clean, then it's safe to say maintenance might have been a priority to them as well.

If seats are...

That was at 6500rpm not wide open. $2500 dollars and a lot of free parts later she got a new engine and is now happy with better valves. Don't let this happen because it will be more than $2500. Not...

You have the bad valves. 2003- 2006 mid year have bad hollow valves. This is carnage waiting to happen. Intake valves are ok. But the exhaust will drop like apples on Newton's head. Valves are...

Yeahhhh. Not possible.
Well it is possible but not recommended. The hull on the side of the boat is paper thin. Those things might rip out just going in a straight line let alone a heavy G turn....

While looking for my grate I've come to the realization that different years use different Style intake grates. Some like my 08 use the 03 through 09 rxt grates. While others I've looked at use the...

All fair answers. But I still think it would look cool af.

I know I know. There is a jetboat section.

There is no traffic on there and I trust you guys more.

I have a set of 2012 Rxp-X sponsoon. And a 2008 speedster 150. I personally have never seen...

I've had this happen 3 different times on 3 different skis. All 3 times was something different.

Bad ecu
Bad connection at mpem, oxidation on pins
Bad ground at front of engine, oxidated and...

That basically answered my question. Dankesir.

I'm making a frankenstein for a friend's ski with some spare parts. Question is I will be using an old 05 crank in an 08 ski.

From what I've read I'm still confused. It's usually newer cranks in...

Is the display good. How much?

I have what you need, $100 plus shipping?

How much for the water box

Might as well do a compression test to see where the leak is. More than likely a head gasket. Be prepared to change out your exhaust valves on head while it's apart. I've blown 4 engines because of...

I have a used one that is sunburnt on lcd but gauges work. $250