Search

Page 1 of 15 1 2 3 4

Search: Search took 1.00 seconds.

  1. Finally tested mine after, fixing my pump...

    Finally tested mine after, fixing my pump efficiency issues. 500ASL, 80 degree air, 82mph dash, blipped to 83mph for a second then held at 82mph, 8100rpm. The 4in hole in the rear made a difference...
  2. If mine actually gets delivered today, I'll...

    If mine actually gets delivered today, I'll compare it to the 13/16 for you. For some reason I've been buying up impellers recently and have quite the selection going.
  3. '21 Seadoo RXPX VS '21 Yamaha GP1800R: Stage 1

    It seems like a never ending battle between SeaDoo VS Yamaha...Hopefully this will settle some debates. https://youtu.be/vIio-nDMv7U
  4. Replies
    41
    Views
    3,455

    Reid 2.0 is that you? Lol

    Reid 2.0 is that you? Lol
  5. Cruising around at 40 or so is great; it saves...

    Cruising around at 40 or so is great; it saves fuel. But even old guys like to pull the trigger.
  6. Replies
    13
    Views
    789

    2004 RXP - Pump System 2005 Challenger 180 4-TEC...

    2004 RXP - Pump System
    2005 Challenger 180 4-TEC SC - Pump
    2005 Speedster 200 Twin 4-TEC SC - Pump
    2005 RXP - Pump
    2006 Speedster 200 Twin 4-TEC SCIC, Edition 1 - Pump
    2006 Speedster 200 Twin...
  7. Replies
    10
    Views
    727

    If you want to drive to Cambridge or PortUnion...

    If you want to drive to Cambridge or PortUnion area in Toronto I can get it pressed off for you.
  8. With the Information you have given. I would say...

    With the Information you have given. I would say your going to be into a motor rebuild/refresh at minimum. If any of those shaving from the helicoils went into the motor the plasma coating on that...
  9. Replies
    13
    Views
    1,731

    474719

    474719
  10. Replies
    13
    Views
    1,845

    its easier to bitch and moan on here then calling...

    its easier to bitch and moan on here then calling or emailing riva to question ask them
    ptscon
  11. Replies
    14
    Views
    1,726

    MS Correction table 1/22 I'm trying to...

    MS Correction table 1/22
    I'm trying to understand these maps and how they relate to the injectors. They have a large effect on fuel. Is one for injector timing ? Why the two tables and what do the...
  12. Replies
    30
    Views
    4,421

    You can buy in the rotax racing site or directly...

    You can buy in the rotax racing site or directly in the greenhulk website . The best thing is replace the entire kit including the shaft . A good investment should be Rotax racing kit based on the...
  13. Replies
    33
    Views
    3,169

    Ok everyone this has been harder than I...

    Ok everyone this has been harder than I originally thought, because of the 30 plus cracks, chips, and gouges. Anyway i am finally at final 3000 sanding and with polish and buff soon. My son said to...
  14. Replies
    43
    Views
    5,148

    I'd rather see SeaDoo adopt the same setup as...

    I'd rather see SeaDoo adopt the same setup as Yamaha, Kawasaki, or Honda.
  15. Replies
    33
    Views
    3,169

    Been a long couple weeks, but we have prepared...

    Been a long couple weeks, but we have prepared for the gel coat fix and ordered the seadoo gel coat... 29 chips dings and cracks were address. Of coarse when we wet sand and final prep I will...
  16. Not a problem, but you do need to put the nose...

    Not a problem, but you do need to put the nose cone back on. It looks like it is untreading and could travel up the shaft
  17. Replies
    33
    Views
    3,169

    Well he got her put together. It was like butter....

    Well he got her put together. It was like butter. I will say the new OEM Viton seal makes the SCer snug. It does not free spin fast like the old ones. It is smooth but you can tell the difference.
  18. The M130 monitors 4 Bosch 4.9 O2 sensors: 3 in a...

    The M130 monitors 4 Bosch 4.9 O2 sensors: 3 in a 1 inch exhaust spacer, and 1 after the turbo. The 3 sensors in the spacer typically show lambda as .75 +/- (due to high exhaust temperatures at the...
  19. Replies
    8
    Views
    708

    A little more wiggle room on the newer exhaust...

    A little more wiggle room on the newer exhaust manifold 472487
  20. Are the hose clamps AWAB hose clamps? The nut...

    Are the hose clamps AWAB hose clamps? The nut should be 7mm. If so, they are superior to T-bolt clamps. I use AWAB's on my turbo charge tubes...never a problem.
  21. Intercooler has to come out also the exhaust can...

    Intercooler has to come out also the exhaust can - I bought a spare set and was going to make them attach from the bottom to make changes to the tabs easier - haven't done that yet - having too much...
  22. Replies
    12
    Views
    2,096

    Rode it another hour. The biggest difference I...

    Rode it another hour. The biggest difference I can tell now is how stable the hull is. I kinda liked how the older model was a bit unstable as that made it fun to ride. This thing is very planted. I...
  23. Replies
    42
    Views
    4,865

    The old and the new

    The old and the new
  24. Replies
    42
    Views
    4,865

    2021 PX Just Arrived

    Just in time for summer....Next year. :lol: Is ever really winter in Florida....not really.

    Some pics for you guys...more on the way.

    Looking good!...
  25. Replies
    239
    Views
    31,500

    By April I'll be wondering what's new for 2022 ;)

    By April I'll be wondering what's new for 2022 ;)
Results 1 to 25 of 354
Page 1 of 15 1 2 3 4