Search

If your jet-ski does 70+mph, why didn't you keep on going?

That Sherriff boat in the picture has a small single engine outboard with the flat bottom hull and net even close to your top speed. :lol:

http://www.ebay.com/itm/MSD-Pro-Billet-multi-channel-Flywheel-/121004313301?item=121004313301&ViewItem=&nma=true&si=3NDHoly%2FsgDW7IyCxtCNku4hM7U%3D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557

Searching for an ADA Non-Girdled Head for the Yamaha 63M-1100 or 65U-1200 engine; part number YA1100HDKIT or YA1200HDKIT.

Just need the head shell but would be willing to purchase with the domes...

What diameter impeller do you have, they come in different sizes?

I believe the Pro Design domes are the same as the Pro-Tec C2 & C3 heads.

Are you looking for the domes or o-rings?

Riva did have the best domes and head design, too bad they stopped making...

I ran across this a few days ago doing a patent search.

Yamaha adjustable sponsons;...

Can you make these a bit larger in diameter?

I'd like to make a clock for the garage and paint it translucent blue.

It might be nice to post what model they fit.

Bump... still searching for a front crank web.

I've had pretty good luck with the oem Yamaha covers, just don't throw them in the wash because the nylon fabric will fray at the ends and the seams will come loose.

I'm not sure if the crank snout taper is the same on those but if you're giving it away I'll pay for the shipping.

I just need the crank snout to be in good condition to lighten some more flywheels on a lathe.

Damaged cranks with cracked webs or broken rods will work fine.

I was hoping to find a damaged crank just for the shipping cost.


Bump

I need a Kawasaki crank front web in good condition or a complete junk crank.

Send me a PM if you have one.

Wow... I snapped a picture of one of those a few years ago and always wondered how it worked.

http://www.mediafire.com/file/ominzmowtzj/Yamaha Superjet Service Manual.pdf

I have two 32cc Riva domes if you're interested.

How much for all three flat top domes?

I have plenty of 701 61X & 62T lightened flywheels for $100 with free shipping.

If you would like to have your flywheel lightened it will cost $60 with free return shipping.

I also have quite...

Bump

I'm looking for some stock Yamaha flywheels in good condition; send PM me if you have any for sale.

I need Yamaha 701, 800, 1100 & 1200 flywheels or 61X, 62T, 63M, 66E, 65U etc.

Very clean!!... and don't forget to use some Teflon wax on the bottom for an extra 0.3 MPH. :smt003

NAPA auto parts stores, they list the PSI and GPH for each pump on their web site.

What kind of fuel pressure do you run on these Sea-Poo's?

I can balance them to tolerance of 2.5 grams statically but not dynamically.

I've found that the stock flywheels with the least amount of balancing holes seem to be the truest running and require...

I use a custom built balancing fixture with greaseless sealed bearings that works for flywheels & impellers.