Search

I've never done this with any of my boats or skis. I'm 35 and had my first ski at 15. Bought a wave raider ii 1100 for $350

I didn't even think about shot peening on the pistons. That's what I like about this forum

Generally, forging will not leave a rough "cast" like product. Forging by nature creates a smooth surface due to the extreme pressure. Those do not look forged. I promise you will never see a...

Agree with doo. The wheel was grazed and the front housing lightly polished. Nothing is destroyed.

Whoa. Beautiful piece but that much monies is on the way to a turbo kit

I was thinking exhaust mani and they just also sold rails :(

you need to provide pictures of a finished product, pictures of it installed, prices shipped to the US, warranty info, what model and years it will fit if it's not OEM size and probably a couple...

ID makes 1000 that work in our rig I didn't even know there was a 1050 option. I thought the VTs were sourced from injector dynamics since they're so reliable and have a good spray pattern and...

The stickers Riva sent me didn't stick to my trailer. I have an active petition going on if anyone is interested

ST3 chews through the chop better and the handling is akin to the T3. Riva sponsons and you can't even compare the two hulls. Also, somehow, the ST3 is very stable when floating(turned off) even...

drilled mine on the left side right behind my left foot goes when I'm cruising so I can feel the warm water if I'm zooming along.

VHT or if you want a real one and done use tractor(implement) paint but use a real spray gun for it. These engines to not get hot enough to damage the implement. I used it on the 05 and use it on a...

Once you change your boost level, timing or cam profile you'll need to tinker with the AFR. All modern vehicles, boats, PWCs etc use fuel trimming. It's a compensation method for different...

I can tell you don't go near a seawall with the seadoo bumpers. I watched a doo get thrashed back and forth into a wall at lake tarpon. Pretty much rocked on them slamming the front and rear rails....

That's beautiful Scott. However it's tax evasion and I'm telling

runs off the broken hopes and dreams of BRP customers

Engages senior citizen mode. Puts on left blinker when you're turning right and goes 15mph under the speed limit and swerves in front of you when you try to pass

guys this is not normal. My 19 hit hard as Fk coming down from about 6ft in the air at 76mph. If you're going to repair it you need to cut the damage into a v and fill it with epoxy resin and...

DO not tune until you see knock. Tune it safely but agressive. If you're tuning it til KR and pull timing back the first time you get bad gas you'll toast your motor. I learned this in my grand...

Drill new holes and go one click below what Riva offers

not a chance. ST3 hull. They make a world of difference and start in the middle if you buy them

If you guys are really on the limit like that then you need to just run 100LL like I did instead of blending. Torco will orange out and waste your plugs but it does work. C16 is great but be...

Good for you. I did the same and lost 25. 205 now and I feel much better at the end of the day and can take more of a beating out there. It's worth it. Also, Epstein didn't kill himself.

you would notice 80lbs. That's kind of the difference between a full tank and empty tank. It would handle better, accelerate harder and gain you some top end. Problem is you'll never remove 80lbs....

If your fingernail can catch it a bore hone won't matter