Search

Type: Posts; User: Green Hulk

Page 1 of 8 1 2 3 4

Search: Search took 0.29 seconds.

  1. Replies
    2
    Views
    212

    This is not a common issue. I see it happen when...

    This is not a common issue. I see it happen when people mount the motor too far rearward and don’t leave a gap in the coupler. This causes the crankshaft to thrust forward which wipes out the thrust...
  2. its not an issue. You only need the two outer...

    its not an issue. You only need the two outer wires connected
  3. Replies
    4
    Views
    275

    Jim’s Performance. Order the service here ...

    Jim’s Performance. Order the service here
    https://www.4-tecperformance.com/index.php?main_page=product_info&cPath=78_80&products_id=6158
  4. Riva parts in stock and ready to ship in the greenhulk store

    http://greenhulk.net/forums/attachment.php?attachmentid=459473&stc=1


    Here at www.GreenHulkStore.com we are still open for business and ready to serve you 7 days a week, 365 days a year. We are...
  5. Riva parts in stock and ready to ship in the greenhulk store

    http://greenhulk.net/forums/attachment.php?attachmentid=459473&stc=1


    Here at www.GreenHulkStore.com we are still open for business and ready to serve you 7 days a week, 365 days a year. We are...
  6. Riva parts in stock and ready to ship in the greenhulk store

    http://greenhulk.net/forums/attachment.php?attachmentid=459473&stc=1


    Here at www.GreenHulkStore.com we are still open for business and ready to serve you 7 days a week, 365 days a year. We are...
  7. Good walk around videos of some of the new 2020 Sea Doo Skis

    Our friend Tim McKercher took some time to make a good walk around video for us showing us the new 2020 Sea Doo skis. Thank you Tim!

    RXT-X 300

    https://youtu.be/yPUqEdbn8mg

    GTI
    ...
  8. Your transom plate is likely leaking. Remove and...

    Your transom plate is likely leaking. Remove and reseal it. Good info here http://greenhulk.net/forums/showthread.php?t=117375
  9. Sticky: MPH would depend entirely on supporting...

    MPH would depend entirely on supporting modifications, engine RPM you choose to run, and ambient temps and elevation in your part of the world.
    Run the appropriate tune for the modifications you...
  10. Replies
    13
    Views
    928

    Awesome! I'm interested to follow your progress...

    Awesome! I'm interested to follow your progress on this build. Thanks for sharing here!

    Jerry
  11. Replies
    2
    Views
    230

    No, you must pull the head.

    No, you must pull the head.
  12. Replies
    8
    Views
    415

    That rubber hose mounts to a fitting on the...

    That rubber hose mounts to a fitting on the transom plate. Remove the hose from the transom plate and then block off the fitting with a rubber cap. You can get vacuum caps at any auto parts store....
  13. Replies
    1
    Views
    178

    There is no demo version. If you have tuning...

    There is no demo version. If you have tuning experience then you will find this extremely easy for you. Here are the instructions on how to use the MaptunerX to write a tune to your ski

    Sea-Doo...
  14. Replies
    1
    Views
    216

    Yes! i recommend using Permatex Right Stuff.

    Yes! i recommend using Permatex Right Stuff.
  15. Replies
    872
    Views
    338,162

    Sticky: Thank you very much!

    Thank you very much!
  16. Sticky: Here is the TRUTH! Sea Doo claims that these...

    Here is the TRUTH!
    Sea Doo claims that these superchargers cannot be rebuilt, without balancing afterwards. You can see in this below in Sea Doo's video, the balancing process is at 23 seconds into...
  17. Sticky: They are statically balanced after the...

    They are statically balanced after the supercharger is completely assembled. The double nuts are ground during the balance procedure. See above pic.
    Also watch the below linked video as it shows...
  18. Sticky: You are confusing the clutch washers with the...

    You are confusing the clutch washers with the nuts that Sea Doo grinds during the actual balance procedure. Those "dimples" on the washers having nothing to do with balancing. They are there from the...
  19. Sticky: yes my mistake. The 120,000 rpm figure is what...

    yes my mistake. The 120,000 rpm figure is what the 300 supercharger bearings are rated at.
    a 300 Engine spinning 8800 rpm has a supercharger spinning 51,500 RPM
    at 9000 RPM the supercharger is...
  20. Sticky: the XXX is sold as a complete balanced...

    the XXX is sold as a complete balanced supercharger
    https://www.4-tecperformance.com/index.php?main_page=product_info&cPath=18_63&products_id=5413
  21. Sticky: this vibration people refer to is actually...

    this vibration people refer to is actually compressor surge. Balancing the wheel to the shaft doesn’t rectify this. Using a good BOV reduces the amount of compressor surge (flutter)
  22. Sticky: Roughly 45,000 on older superchargers. 300...

    Roughly 45,000 on older superchargers. 300 superchargers spin 8% faster
  23. Sticky: if you look closely at the clutch end of the 300...

    if you look closely at the clutch end of the 300 supercharger you will see the supercharger has grind marks they use to balance it. You won’t see such marks on the 185/215/255/260 superchargers.
    ...
  24. Sticky: IMPROS just does the balancing. Art at Engine...

    IMPROS just does the balancing. Art at Engine Tech can handle the rebuild and balancing.
  25. Sticky: http://greenhulk.net/forums/images/misc/quote_icon...

    http://greenhulk.net/forums/images/misc/quote_icon.png Originally Posted by ncdoo http://greenhulk.net/forums/images/buttons/viewpost-right.png
    Maintenance free means no maintenance required in my...
Results 1 to 25 of 200
Page 1 of 8 1 2 3 4