Search

I have to comment on the copper spray... years ago Fercho told me never to use it on 2 strokes and I just took it as his personal opinion, then years later I tore into a SBT motor someone patched and...

i go 35ft lbs on all 10mm bolts, (25 on m8 and 10 on m6)

and light coat 1211 to coat base gaskets and both sides of stock reed cages

need a good rebuildable set

pm me

not with the mods listed but it may have low top rpms because freeflow/tdr

its not one of mine Art

yes 2 front factory pissers and add 2 for cyl heads in the rear... just be sure to have the exhaust mocked up before you drill the holes. trust me. lol

sounds like you have a good plan. Maybe run...

pro tip: when riding, your right hand never leaves the bars, so I always put my water exits on the left rear of the hull so I can reach back there and feel the water temps from time to time

also, on the jetworks drain... use a Y for the jetworks exit tapped into the main stinger drain (top right-rear of the pipe. you want the jetworks drain low as possible so it will gravity drain the...

just run #1 into the pipe and block the other on the back of the pipe, then 2 and 3 overboard.

running the pipe hotter helps with scavenging

also have speedos, but the candoo module will give you GPS speed on the dash

I have one of the R&D extended turn nozzles

pm me

I have stepper motors

that piece goes on the right side (battery box installed) btween the hull and box

we usually discard those 2 pieces of foam

I have a couple used ones here. One blue pro and a red shim style valve

pm me

I need a harness and fuse box for 07-11 RXP (old style hull). Something before IBR, but not 04-06

PM me

guess im old skool

garmin foretrex 201, 301, 401

all ive used for years

sorry no

sold it already, but thanks

thats stock

yes 350.00 shipped

replied to pms

Parting out 04 RXP. Had a 137 +4 with associated mods. Motor sold. S/C sold. I/C sold

04 ECU flashed by LB motorsports. 9100 rev with 80lb flash sold

80 lb Siemen injectors. low hours $250.00 ...

message me- yes

got one

shoot me a cel number for pics

first off, bikes have wheels

second, maybe post a pic of the screws