Search

Page 1 of 16 1 2 3 4

Search: Search took 1.00 seconds.

  1. Replies
    8
    Views
    96

    Press the center pin in from the front storage...

    Press the center pin in from the front storage compartment. Once you get the first one to work, you will see how easy these plastic pins are to operate.

    Just press slow and easy until it clicks...
  2. Replies
    8
    Views
    96

    The pin push distance is maybe a few mm, not far...

    The pin push distance is maybe a few mm, not far at all. There will be a little click as the pin moves farther in, then the whole fastener becomes loose and easily removed.

    Pushing the pin too far...
  3. Replies
    5
    Views
    167

    A scoop style intake grate is about keeping the...

    A scoop style intake grate is about keeping the jet pump hooked up. When jumping waves, as soon as the hull rises above the water surface the intake grate is not going to be doing anything until the...
  4. Replies
    1
    Views
    69

    The new-for-2019 FX hull seems to be getting very...

    The new-for-2019 FX hull seems to be getting very good early reports for rough water competency. It needs a cut ride plate or aftermarket ride plate (not yet available), but otherwise even stock it...
  5. Replies
    4
    Views
    154

    When you are getting data from different online...

    When you are getting data from different online sources, you should be referencing (and linking) to those sources in your report.

    Different test conditions and different test methods will provide...
  6. Did you mean Triton Trailers? I certainly can...

    Did you mean Triton Trailers?

    I certainly can recommend the Triton welded aluminum PWC trailers. I have had several over the years, currently own a WC2-2 (overkill for most people) and the Triton...
  7. Setting aside purchase cost differences for a...

    Setting aside purchase cost differences for a moment, the 2019 FX is a brand new hull design. 2014-2018 FX hulls are prior generation.

    I have not yet ridden the new 2019 FX hull but reports so far...
  8. Replies
    7
    Views
    144

    View Post

    Polaris ‘factory’ (via field/dealer service reports) discovered that some LR-505 modules were becoming confused about whether the engine was in fact running or not running. Pressing the Start/Stop...
  9. Welcome. If you have a Yong Wang it should say...

    Welcome.

    If you have a Yong Wang it should say so, cast into the reverse bucket.
    If you have a Polaris it should have the word Polaris on the hull decals.

    What are the first few letters on...
  10. Exhaust is cooled by water spray injected into...

    Exhaust is cooled by water spray injected into the hot gases, the water and exhaust exit the hull together.

    There is a specific technique involved in removing and rebuilding the MSX through-hull...
  11. Replies
    15
    Views
    291

    To be clear, until diagnostics is complete all...

    To be clear, until diagnostics is complete all the red/purple wires should be joined together.

    When diagnosing electrical/ignition issues there is no need for CDI to be connected to Orange,...
  12. Replies
    5
    Views
    621

    There is no downside to spending 95 minutes...

    There is no downside to spending 95 minutes riding around following the factory recommended engine break-in procedure.

    You can handle the boredom, it is literally less than two hours. And you are...
  13. Replies
    4
    Views
    265

    Is the bunk spacing on your trailer correctly...

    Is the bunk spacing on your trailer correctly matched to the hull width between the hull strakes? If yes, then you can build the dolly to match.

    I use Liquid Rollers bunk spray to reduce friction...
  14. Replies
    16
    Views
    461

    What capacity battery is in there right now? ...

    What capacity battery is in there right now?

    Amp-hour rating (not CCA) is what matters for how long the battery can drive a sound system with the engine not running.

    The power consumption of...
  15. Replies
    13
    Views
    468

    look on the Yamaha Waverunner web site...

    look on the Yamaha Waverunner web site for an owners manual PDF

    https://waverunners.yamaha-owners-manuals.com/

    Maintenance chart...
  16. Amazon provides a store front for huge numbers of...

    Amazon provides a store front for huge numbers of third party sellers. A huge portion of the product volume sold on Amazon is not ‘from’ Amazon.

    Amazon does have a counterfeit products problem....
  17. Replies
    17
    Views
    777

    SVHO is not intended to run on regular octane...

    SVHO is not intended to run on regular octane gasoline.
  18. You need to be methodical with diagnostics....

    You need to be methodical with diagnostics. Guessing does not help.

    Since the CDI is firing only two of the three cylinders, you need to work through the things that would affect just one...
  19. The better bilge pumps for PWC use have...

    The better bilge pumps for PWC use have electronic water sensing. No moving parts, no float switch.

    I use the Whale SS1212 model.

    No switch needed, but I could add one if I had a desire.
    ...
  20. Replies
    17
    Views
    777

    SVHO engine needs 91 octane, not 93. HO engine is...

    SVHO engine needs 91 octane, not 93. HO engine is happy with 87.

    The ride plate was never a problem. The intake grate rear bolt area was at risk of cracking on GP 1800 (2017 & 2018 only) and there...
  21. Note: The following is not Yamaha specific. ...

    Note: The following is not Yamaha specific.

    Unlike land vehicles, PWC have an essentially unlimited supply of raw water for cooling flow. The jet pump is continually supplying raw water into the...
  22. Replies
    17
    Views
    777

    The Yamaha SVHO engine requires 91 octane...

    The Yamaha SVHO engine requires 91 octane gasoline. If you do not have 91 octane available, the Yamaha non-supercharged engine is the better choice.

    Yamaha 1.8 liter engine is circa 180hp rated,...
  23. Replies
    12
    Views
    350

    This might help ...

    This might help

    http://greenhulk.net/forums/showthread.php?t=278184&p=3010226&viewfull=1#post3010226
  24. Replies
    18
    Views
    1,200

    Put flat brackets on the ends of the angled 4x6,...

    Put flat brackets on the ends of the angled 4x6, down to the 2x8.

    Bracket can be wider than 4 inches as long as it doesn’t reach too close to the top of the angled bunk.

    You could also run lag...
  25. Take the time to step back and understand what...

    Take the time to step back and understand what you are working with.

    This is an old watercraft. It is common for an old machine to have multiple problems. Some things will be broken, some things...
Results 1 to 25 of 400
Page 1 of 16 1 2 3 4