Search

Type: Posts; User: surfcitypops

Page 1 of 8 1 2 3 4

Search: Search took 0.03 seconds.

  1. So here's what happened today. The 1" Crowsfoot...

    So here's what happened today. The 1" Crowsfoot did the job. Plenty of clearance on the reverse cable side. Less on the steering cable side so I may struggle a little bit more over there when I...
  2. Thank you. I was going to try the PVC method...

    Thank you. I was going to try the PVC method next. I'm still hopeful an actual tool will work. The clearance is suspect, though, as you say. You'd think the folks that make/sell the billet nuts...
  3. Ordered four billet aluminum nuts for my two skis...

    Ordered four billet aluminum nuts for my two skis and as luck would have it, the shape of them is not the same as OEM plastic. They are not even a common shape for any ordinary socket as they aren't...
  4. Just bought 4 of the billet models. Throwing...

    Just bought 4 of the billet models. Throwing them into the tool box along with 2 starter relays and the rest of the emergency kit. Not letting another two cent piece of plastic end my day or sink...
  5. 2006 Wake 155 - Reverse cable lock broken...

    So the reverse cable lock nut failed and allowed water into the hull. Hard to believe Seadoo would make such an important part out of such thin, brittle plastic. But alas, they did.

    Got the...
  6. I'll post a video of what it does so someone more...

    I'll post a video of what it does so someone more knowledgeable than me can tell me where the play will be found and how to fix it. I'm still struggling with separating the two pieces of trim on the...
  7. 2007 Wake 215 - steering column play... normal? Fixable?

    So my '07 Wake 215 has what I feel is too much play in the steering column. When you accelerate and thereby pull upward on the grips, you feel a noticeable clunk that to me indicates improper...
  8. WTB WTB - Are Scammers Roaming Around Here?...

    I posted a WTB the other day for an underhood skin for a GTX LTD and immediately got two private messages from members with zero posts telling me they have what I need and to contact some other...
  9. Thank you both for the info. Exactly what I was...

    Thank you both for the info. Exactly what I was looking for. Less mystery now.
  10. WTB - Parts So Cal. I guess I need to cross reference the...

    So Cal. I guess I need to cross reference the part numbers for my '06 LTD and other models so I know what fits and what don't.
  11. Yes. Circle. My question, albeit a poorly...

    Yes. Circle.

    My question, albeit a poorly worded one, was meant to be more specific. I'm looking for a description, like a roadmap of sorts, of the path the water takes when flushing through...
  12. WTB - Parts WTB - 2006 GTX LTD hood and or underhood...

    Hood strut seized and took out (broke the mounting tab) the underneath plastic skin of my front hood. Part number 269501415 is no longer available. Anyone have a hood for a 2006 GTX LTD for sale?
  13. Novice question re 2007 Wake 215. What exactly is getting flushed when using port...

    Someone please give me the Seadoo 101 and tell me:

    1. what is that flushing port to the left of the pump doing when the ski is being operated;

    2. where and what exactly does that flushing...
  14. Thanks for that. I will check the vehicle's...

    Thanks for that. I will check the vehicle's specs today. 2018 Sierra Denali 1500 4WD. I guess the debate is between allowable tongue weight and ideal tongue weight.
  15. Not entirely sure about age but the trailer is...

    Not entirely sure about age but the trailer is made by FE Trailers of San Diego specifically as a tandem PWC trailer so I think I'm good there.

    And the more gas you have in the nose of the ski...
  16. Excellent. Thank you. This is how I have...

    Excellent. Thank you.

    This is how I have them positioned right now but I'll probably have to scoot them back at least another several inches to achieve ideal tongue weight. Does everyone's...
  17. That's good advice. I guess I'll shoot for near...

    That's good advice. I guess I'll shoot for near 15% fully loaded so I'm not too light if I tow with the tanks empty.

    When the tanks are full, that represents about an additional 360lbs forward...
  18. Thanks. I had to slide the skis back on the...

    Thanks.

    I had to slide the skis back on the bunks because my tongue weight was over 260lbs, and that's with empty vessel fuel tanks and 3 empty 5 gallon gas cans. I'm going to have to slide...
  19. Axle is not adjustable. I had about 260lbs...

    Axle is not adjustable.

    I had about 260lbs tongue weight and that was with empty vessel gas tanks and three empty 5 gallon fuel tanks. If I fill them up, that'll add another 300lbs in front of...
  20. Thanks. I had the bow roller just above the eye...

    Thanks. I had the bow roller just above the eye but there just isn't much room there. The eye is very high up on the hull. I may just use some ratcheting tie downs from the eye the trailer frame.
  21. 2007 Wake 215's heading to water for first time in 3 years... trailer help...

    I posted in the trailer section already but thought I'd also post here since this has far more traffic.

    I need some help here. I have a pair of 2007 Seadoo Wake editions on a double FE trailer and...
  22. Back in the game after 3 years away. Trying to get double PWC trailer sorted.

    Folks, I need some help here. I have a pair of 2007 Seadoo Wake editions on a double FE trailer and I'm trying to get the tongue weight and bow rollers situated, while also figuring out how to hold...
  23. Replies
    10
    Views
    3,953

    The fact that it went back and forth between...

    The fact that it went back and forth between running fine and malfunctioning means it does not sound like a supercharger failure to me.
  24. That is such an indictment of Seadoo quality. No...

    That is such an indictment of Seadoo quality. No way in hell we should be incurring a $500 charge every 50 effing hours.
  25. Check wiring resistance from the sensor to the...

    Check wiring resistance from the sensor to the ECU.
Results 1 to 25 of 200
Page 1 of 8 1 2 3 4