Search

beerdart · 02-11-2021, 06:17 PM

6 steps 10 minuets remove electrical connector. Remove holding bolt. Remove the sensor. Replete in reverse order.

beerdart · 02-11-2021, 04:06 PM

http://greenhulk.net/forums/attachment.php?attachmentid=471374&stc=11 Bolt #45 #44 is the CPS

beerdart · 11-16-2020, 01:23 PM

Running the fuel pressure is only 5-9 psi. The needle is opened by vacuum on the diaphragm and not fuel pressure. Pop off psi is only a bench test to simulate running vacuum.

beerdart · 11-07-2020, 07:37 PM

The timing trigger it is on the OD 120 degrees apart and non magnetic.

beerdart · 11-07-2020, 11:13 AM

Just checked and the 785 is wasted spark.

https://m.facebook.com/story.php?story_fbid=10224394193593222&id=1557074262

beerdart · 11-07-2020, 07:26 AM

How can the 785 be sequential ignition with only 1 trigger coil?

beerdart · 10-21-2020, 07:39 AM

Bump

beerdart · 10-01-2020, 11:03 AM

Just slide the box back and use a longer coupler.

beerdart · 07-21-2020, 01:32 PM

Yes if he bought the universal (Flashable) cluster

beerdart · 07-21-2020, 12:37 PM

2006 is a one year only Cluster did you buy the correct one?

beerdart · 07-16-2020, 02:01 PM

Very lean very.

beerdart · 06-05-2020, 02:07 PM

I measure to the start edge of the pickup. You could ohm the pickup and rotate the motor and note the degrees from TDC.

beerdart · 06-05-2020, 01:36 PM

Just measure the angle with a protractor or degree wheel. Pic of Kawasaki 1100 for referencehttp://greenhulk.net/forums/attachment.php?attachmentid=462682&stc=1

beerdart · 06-05-2020, 12:19 PM

Just measure how many degrees the pickup is from TDC.

beerdart · 06-03-2020, 08:21 AM

Welcome back.

beerdart · 05-03-2020, 06:23 AM

461141

beerdart · 03-22-2020, 06:33 AM

Here is 07-08-09

beerdart · 03-16-2020, 07:45 PM

The XIR is way more then just trim delete. Its a hand laid lightweight hull with extra chins pipe and setback motor. Its a full on factory race ski.

beerdart · 02-24-2020, 06:05 PM

Outstanding vid and production. Im glad to help Chris and his MS cause. Please share like and donate. Link to donate. https://www.facebook.com/ProTecWaveraider/

beerdart · 02-17-2020, 01:34 PM

Pop some info on the FB group im sure Dan would know the entire history

beerdart · 01-05-2020, 05:03 PM

Printing corrected model.
http://greenhulk.net/forums/attachment.php?attachmentid=457091&stc=1

beerdart · 12-29-2019, 12:01 PM

Good advice IMO the new Prusa Mini is the new one to look at being 32bit and twice the speed of conventional I3.

beerdart · 12-28-2019, 06:14 PM

Shoot me the file ill print it in PETG. Or upload to. https://www.facebook.com/groups/157943978254419/

beerdart · 12-07-2019, 09:08 AM

https://www.facebook.com/groups/280413146156844/permalink/473009713563852/

beerdart · 12-04-2019, 02:36 PM

I like the VP style jugs with the Stroker Trigger
http://www.strokerindustries.com/the-trigger-fluid-control-system/

Search

Search: Search took 0.20 seconds; generated 42 minute(s) ago.

Thread: 2009 Seadoo RXT 255is Crank position sensor replacement

Thread: 2009 Seadoo RXT 255is Crank position sensor replacement

Thread: Mikuni carb rebuild issue

Thread: How does the Fuji (650,750,780) ignition coil system actually work?

Thread: How does the Fuji (650,750,780) ignition coil system actually work?

Thread: How does the Fuji (650,750,780) ignition coil system actually work?

Thread: 1100 waveraider performance modification

Thread: Doo powered Kawasaki STX-15f Build

Thread: Programming a 2006 rxp gauge cluster

Thread: Programming a 2006 rxp gauge cluster

Thread: Stock Pro 785 Carb Springs?

Thread: GP1200R Static Timing

Thread: GP1200R Static Timing

Thread: GP1200R Static Timing

Thread: I’m baaaack.

Thread: Buds dess interface

Thread: 2008 Seadoo Speedster 215hp wiring diagram

Thread: Picked up a XIR

Thread: A touching story about a person with MS and got into Jet Skiing

Thread: 2005 Polaris “MSX150” Limited Anniversary Edition

Thread: 3D printer recommendations?

Thread: 3D printer recommendations?

Thread: 3D printer recommendations?

Thread: Want to consider racing

Thread: What gas cans/fill method you guys using?