Search

I will definitely be greasing mine with a very slow pump every 50 hours, I’m sure one of the reasons mine failed was because it was never greased even when I paid for the prepaid maintenance and the...

Tested it today and burned a half tank of gas at WOT, moving through the whole RPM range and what a difference! :lol: this thing launches way better than before, most of the testing was done in a...

Lastly a couple of bold ons that were left to do. Pro Cooling kit, and Jim's cut. I also added two valves on the inlet lines for IC and engine (I know some say not necessary on Yamahas when towing)...

I decided to properly seal the transom plate while I was at it, my ski from day one would get a little water in and I always though it was normal, that is until I read one of Jerry's threads and saw...

Testing it again the engine coupler and everything is looking good.

So finally after all go it working, and wanted to give an update in case someone in the future finds themselves on this position.

Also wanted to give thanks to all who chimed in with a posible...

Thanks TimeBandit lots of great info and advise. I will definitely implement most of it, if not all.

I'm considering making an aluminum reenforcement for it as well. I'm also coming to the...

this is option 1 if not then moving to the other

Yes that what pulled through the wall. The top one was already chewing the wall and coming out but not with enough room to fit a grinder, and one of the bottom ones. Once I was able to fit a pry bar...

the bolt heads? Didn’t have to cut them out all three broke right away when I tried losing them out with minimal force.

So I been on a mission with this, turns out after months of waiting the OEM housing is on backorder; then I was told it will be until next year when it would be available, so I decided to order the...

I been through a couple of TTO’s and switch to Tiny Tach which works way better if you don’t want to spend the money on the PET

Just check it out thanks, looks like some don't even remove the SC and IC which is a plus. Gotta find a service manual now.

isa alnoaimi you were right on the money man, unfortunately the bearing is leaking.

Don't know if there is a thread for this repair yet, but I will start searching. If anybody knows of one please...

Question if it was the bearing wouldn’t water be coming in just from sitting in water not even running? And wouldn’t I feel vibrations?

Ski is a 2014 and the timing chain never gave out, engine seize from detonation at around 130 hours

�� OMG I don’t even know where to start with that, gonna search now hopefully there is a thread about it

Hi guys, I recently installed the kanaflex to Power Filter and went to the canal to try it out, and it made me wonder why I took so long to do it, what a difference!

Anyways after the test ride I...

Also looking for 2014 FZR SVHO manual if anyone could forward it redg.iphone@gmail.com thank you!

I’m on the same boat, will be breaking in a replacement engine with Stage 1 supporting mods on it and was advised by Jesus to run the Stage 1 map but taking easy for the first two hours.

Which tune?

So after all this time, did it back fired? I was just about to do the same thing but Stage 1

I know is an old thread, but I’m glad I saw it since I’m going to be breaking in a new SVHO with Maptuner X Stage 1 mods and was planning to do the break in with the stock map, then flash it back to...

Pull your valve cover and see what chain you have

damn I thought they would have change it. =(