Search

Type: Posts; User: Mythos

Search: Search took 0.00 seconds.

  1. OK, I was able to remove the SC. One concern I...

    OK, I was able to remove the SC. One concern I had based on the invoice from the gentleman who did the install (I discovered this this morning) was that he may have used a 17 tooth gear instead of a...
  2. Also, Is it a safe assumption that I should NOT...

    Also, Is it a safe assumption that I should NOT run this thing while the SC is like that?
  3. What may cause it to be spinning freely...

    What may cause it to be spinning freely immediately after a rebuild? Thought I saw something about a specific nut backing off??
  4. OK, checked, yes, I can spin the SC freely,...

    OK, checked, yes, I can spin the SC freely, should I be able to? Also checked the hoses from and to the SC, they are all in place, however the intake one does not seem to have clamps on it at either...
  5. I did a visual inspection of all the hoses and...

    I did a visual inspection of all the hoses and did not see anything specifically out of place, but I'll double check these. I'll also need to check the spin on the SC per your suggestion as well....
  6. 2008 RXT not getting to full speed or RPM after Supercharger rebuild

    OK, so I've searched all over the web on this and found a lot of information but none of it seems relevant. Here's where I am. I have a 2008 RXT that I recently acquired from my father in law, so I'm...
  7. I just ordered a pair of these for my 2008 RXT...

    I just ordered a pair of these for my 2008 RXT 215 and am having a similar issue. Based on the cut out's on the handlebars, the palmrest points almost straight down, so not only does it not support...
  8. Sticky: OK, I realize I'm replying to an almost 10 year...

    OK, I realize I'm replying to an almost 10 year old thread, but it looks like you are still active on the forums JT. I just acquired my father in law's 2007 SeaDoo RXT and the sturt for the hood is...
Results 1 to 8 of 8