Search

Type: Posts; User: xlint89

Page 1 of 8 1 2 3 4

Search: Search took 0.14 seconds.

  1. Is the quicksilver oil TCW3 rated? NGK BPR...

    Is the quicksilver oil TCW3 rated?

    NGK BPR What number spark plug?

    What are they gapped at?

    Battery shouldn't matter to the spark created. Magneto takes care of that.


    There will be no...
  2. Replies
    24
    Views
    747

    Sorry, I got nothing more to add. Just wanted...

    Sorry, I got nothing more to add.

    Just wanted to say hello to Art and Rich. Good to see you guys.
  3. Thread: PSI Waterbox

    by xlint89
    Replies
    11
    Views
    186

    Normally Fuji and domestic waterboxes don't mix.

    Normally Fuji and domestic waterboxes don't mix.
  4. I find it interesting that you oil fouled your...

    I find it interesting that you oil fouled your plugs. I have never really read about that happening.

    I believe the first model years used a constant rate pump. On the newer years, they went with a...
  5. Thread: PSI Waterbox

    by xlint89
    Replies
    11
    Views
    186

    Check out post #18 Magazine Write Up's/Tech...

    Check out post #18

    Magazine Write Up's/Tech Articles - Page 2 (greenhulk.net)
  6. That's pretty good speed for a 1050..

    That's pretty good speed for a 1050..
  7. Thread: PSI Waterbox

    by xlint89
    Replies
    11
    Views
    186

    Have not seen many PSI water boxes at all. Prob...

    Have not seen many PSI water boxes at all. Prob no different than any other after market one. Maybe a slight increase in acceleration with more increased noise levels.

    You do also have a PSI...
  8. If I'm not mistaken, because the motor mount to...

    If I'm not mistaken, because the motor mount to hull bolt is under the engine mounting plate.

    If you can access them both, go for it.

    There's a ton of info for that engine available. What are...
  9. Replies
    6
    Views
    446

    Ditch the in line fuel filter. Was not used by...

    Ditch the in line fuel filter. Was not used by polaris and is not needed.

    The water seperator has a fuel filter installed into it. Yours is sitting on the bottom of the fuel bowl though. It should...
  10. Have you actually tried installing larger jets? ...

    Have you actually tried installing larger jets?

    I had a problem once that larger jets didn't seem to make a difference. Turned out to be the soft clear fuel lines I was using were collapsing
  11. Replies
    1
    Views
    69

    Welcome to the Hulk. You seem to have...

    Welcome to the Hulk.

    You seem to have something not normal going on there.

    That ski should see 50 MPH with no problem.

    When it acts up, try applying the choke a little bit and see if that...
  12. Replies
    2
    Views
    113

    Best bet is to experiment and see what you get....

    Best bet is to experiment and see what you get. It's really easy to swap them out and do back to back testing.

    I used to beach the ski with the back end on shore and do it right there.

    I found...
  13. Replies
    4
    Views
    238

    WTB - Parts A quick search isn't showing any available. If...

    A quick search isn't showing any available.

    If you're interested in trying something else, I've read the Virage "batwing" ride plate does pretty good. Saw those for pretty cheap if you wanna give...
  14. Replies
    266
    Views
    87,661

    Sticky: This is interesting... Polaris 96 97 1996...

    This is interesting...

    Polaris 96 97 1996 Hurricane 700 Aftermarket ATM Ride Plate Fiber | eBay
  15. Replies
    1
    Views
    81

    Picture please.

    Picture please.
  16. Aluminum colored spark plugs is not good. That...

    Aluminum colored spark plugs is not good. That usually means aluminum from the piston. You'd better look into this pronto.

    Chocolate brown color is what you're looking for.

    Fuel pressure should...
  17. Do you have a picture of the fitting in question?

    Do you have a picture of the fitting in question?
  18. Replies
    4
    Views
    179

    The original Mikuni round single outlet fuel pump...

    The original Mikuni round single outlet fuel pump was rated at 35L per hour.

    Mikuni American Corporation

    I have not read many people having issues with higher output fuel pumps causing...
  19. Replies
    10
    Views
    619

    Leak down sounds like it should be fine then. ...

    Leak down sounds like it should be fine then.

    Restrictor is working? Have you tested fuel pressure to state that? If so, what is your readings at idle and at 3,000 RPM?
  20. Replies
    4
    Views
    157

    I know. I only have 1 impeller like that.

    I know. I only have 1 impeller like that.
  21. Replies
    10
    Views
    619

    Do you have the restrictor in the return hose? ...

    Do you have the restrictor in the return hose?

    Did you ever do a leak down test?
  22. Replies
    4
    Views
    157

    This does happen sometimes. The base of the...

    This does happen sometimes. The base of the impeller may be bottoming out on the stator. Or the trailing edge of the impeller blades may be contacting the vanes of the pump.

    You may need to add a...
  23. Welcome to the Hulk. Have you tested for spark...

    Welcome to the Hulk.

    Have you tested for spark while running? (in line spark tester)

    What do you mean you swapped wires around? I assume you mean the plug wires? Red domestic engine coils have...
  24. Replies
    24
    Views
    747

    All that little gold flake makes me think it was...

    All that little gold flake makes me think it was the connecting rod wearing away. Before SBT came out with rods for the 785, I think shops had to machine down sled rods to work. I wonder if those are...
  25. Replies
    6
    Views
    446

    Your drive shaft is splined and goes into the...

    Your drive shaft is splined and goes into the engine coupler on the engine side. I'm assuming that came unthreaded somehow. That would kind of make sense, but I've never seen one actually loosen up...
Results 1 to 25 of 200
Page 1 of 8 1 2 3 4