Search

Type: Posts; User: Jimmyg69

Page 1 of 4 1 2 3 4

Search: Search took 0.00 seconds.

  1. Thread: Pump stator

    by Jimmyg69
    Replies
    10
    Views
    352

    I just did this . I used 3m 4200 marine sealant ....

    I just did this . I used 3m 4200 marine sealant . Bought a used housing on eBay with new bolts . They are cheap .
  2. Replies
    0
    Views
    162

    09 ultra 260lx top speed ?

    So I bought a used 09 260lx . Had 50 hrs on it . Did the exhaust filter when I bought it.Itís been great . Supercharger pulley fell apart around 100hrs . Put a new pulley , belt etc. only issues Iíve...
  3. Replies
    7
    Views
    258

    Well I took it outside and plugged it in . Left...

    Well I took it outside and plugged it in . Left hose off , and it’s showing 00 with engine running . So k447, you are correct . Has to be something with hose or Speedo nipple . Well that’s a relief .
  4. Replies
    7
    Views
    258

    To reset it I just followed the re cal steps...

    To reset it I just followed the re cal steps found on here somewhere . It just seems weird … I look at a problem like , what changed ? Well the ignition upgrade , now the whole entire ski is grounded...
  5. Replies
    7
    Views
    258

    I blew thru tube up at mfd . Seems clear , no...

    I blew thru tube up at mfd . Seems clear , no kinks . I reset it . Went to 00 until I started it then started going up. I. Wondering if heat , vibration from the carrier bearing plays a roll ? i...
  6. Replies
    7
    Views
    258

    It only seems to do it when ski is running . I...

    It only seems to do it when ski is running . I reset it and it went to 00 until I started it . I took it out of ski and brought it inside as it’s been raining for 2 days . I’ll let it dry out good...
  7. Replies
    5
    Views
    189

    I only let it idle for a min or so on the hose ....

    I only let it idle for a min or so on the hose . Got some new plugs on the way .and a new oil pump cable as this one is frayed. I wanted to change the wires , but haven’t been able to locate any ....
  8. Replies
    5
    Views
    189

    I only had a 1/4 tank so I added some oil to gas...

    I only had a 1/4 tank so I added some oil to gas and let it idle while I cranked up the pump . Ordered 4 polaris clamps , and some eBay . Does it matter where u hook the lines on pump ? Or they all...
  9. Replies
    7
    Views
    258

    99 sltx speedo says 67?

    Ever since I upgraded ignition, when I start ski , Speedo climbs to 67 and stays there on trailer . 22,33,44,67? Took tube off and blew thru it up by mfd . I made sure it had a good connection under...
  10. Replies
    5
    Views
    189

    Oil line spring clamps ? 99 sltx

    Anybody know what size to get ? Ordered some on Amazon but they are cheesy . Need some quality clamps . Also , do you need to bleed oil pump after removal ?
  11. Replies
    14
    Views
    331

    Success!!! Charged the battery and she fired...

    Success!!! Charged the battery and she fired right up ! Now I can finish putting it back together . Didn’t want to bolt the tank in I case it needed to come apart again
  12. Replies
    14
    Views
    331

    Red/purp wire only had 8-9 cranking volts . I’m...

    Red/purp wire only had 8-9 cranking volts . I’m gonna fully charge battery and see if it helps . It’s new this year agm . Seemed ok , but I think this newer ignition need a lot more power to fire off...
  13. Replies
    14
    Views
    331

    Red/pur wire ? Seems to go to circut breaker also...

    Red/pur wire ? Seems to go to circut breaker also . Is this still correct ? Tested brown wire out of cdi . 2 volts instead of 8-9 ?
  14. Replies
    14
    Views
    331

    Well I got it together but no spark ….. all...

    Well I got it together but no spark ….. all wiring seems correct ? This sucks
  15. Replies
    14
    Views
    331

    http://greenhulk.net/forums/attachment.php?attachm...

    http://greenhulk.net/forums/attachment.php?attachmentid=479969&stc=1This is what I found online
  16. Replies
    14
    Views
    331

    Well the black wire from stator connects to...

    Well the black wire from stator connects to harness coming out of e box where cdi is located . Where it ends in a bullet conn. The black wire from new cdi has a ring conn.
    kinda messed me up . It...
  17. Replies
    14
    Views
    331

    Yes. Stator, cdi, gasket

    Yes. Stator, cdi, gasket
  18. Replies
    14
    Views
    331

    http://greenhulk.net/forums/attachment.php?attachm...

    http://greenhulk.net/forums/attachment.php?attachmentid=479956&stc=1http://greenhulk.net/forums/attachment.php?attachmentid=479957&stc=1
  19. Replies
    14
    Views
    331

    I have a photo I’ll try to upload . Basicly cdi...

    I have a photo I’ll try to upload . Basicly cdi black wire has a ring terminal. Black wire from stator is a bullet . I found some instructions online . I think I cut off bullet and add to grounds ....
  20. Replies
    14
    Views
    331

    The black wire with bullet connector connects to...

    The black wire with bullet connector connects to stator black wire on 1 end ,but nothing in box to connect to . Should I cut the connector off and put it with the grounds ?
  21. Replies
    14
    Views
    331

    99 sltx ignition upgrade instrutions ?

    I got most of it fig out but ended up with an extra black bullet connector ?
  22. Replies
    2
    Views
    251

    1999 sltx stator, Bendix install

    So Iím about to install new stator.

    Iím unsure of starter shim, and spring placment.

    Doing this in hull. Anybody know ?

    This is how I think it goes
  23. Check the fuses

    Check the fuses
  24. Replies
    6
    Views
    237

    99 sltx 1050

    99 sltx 1050
  25. Replies
    6
    Views
    237

    I tried every link . It just says you need access...

    I tried every link . It just says you need access . I requested it 2weeks ago then again recently. I have a Hayes online one . Just be nice to get a look at the polaris one before I update my...
Results 1 to 25 of 84
Page 1 of 4 1 2 3 4