Search

Type: Posts; User: 2fast4u

Page 1 of 8 1 2 3 4

Search: Search took 0.06 seconds.

  1. To check the valves for being bent , use a...

    To check the valves for being bent , use a cylinder leak checker (compressed air in each cyl. with valves closed) and see if any valves are bent, this way you will know it the head has to come off...
  2. Replies
    4
    Views
    147

    remove injectors and have them cleaned and tested...

    remove injectors and have them cleaned and tested for possible leaking fuel when the engine is off. sounds like they are leaking when off and the engine is flooded on the restart. Or the ecm is...
  3. Replies
    7
    Views
    144

    check the water coming out of the oil cooler...

    check the water coming out of the oil cooler pisser exit (left side of ski) for possible oil mixed in the water, you might have a defective oil cooler .
  4. Replies
    10
    Views
    211

    Based on the information you have posted I bet...

    Based on the information you have posted I bet the 17 will fall short on reaching 7500 to 7600 rpms. A 16 pitch will be closer to meeting your desired final max rpms. Please post your final pitch...
  5. Replies
    10
    Views
    211

    a two pitch change on the trailing edge should...

    a two pitch change on the trailing edge should give you 300 to 350 more rpms. Do you think this 300+ rpms will be enough for you? what is your max rpms you have now at full throttle on smooth water...
  6. Replies
    5
    Views
    241

    threebond should work ok also, be sure surfaces...

    threebond should work ok also, be sure surfaces are clean of any oil, i use laquier thinner
  7. Replies
    6
    Views
    333

    a additave called " seafoam " works good also.

    a additave called " seafoam " works good also.
  8. if you still want one after reading Jerry's post...

    if you still want one after reading Jerry's post take the cone to a auto parts store ( O riley's, advance, auto zone) they usually have a assortment of them they can match up to the groove in the cone
  9. Replies
    4
    Views
    317

    I have a friend in Fla. that bought a used stock...

    I have a friend in Fla. that bought a used stock 2016 fx svho 69 mph stock, then he did these mods, air filter, jims cut ride plate, TJ exhaust mod, solas prop, remove the spray on the back, ribbon...
  10. Replies
    4
    Views
    317

    Thanks, that is a couple of years old seadoo...

    Thanks, that is a couple of years old seadoo info, I see they now do yamaha ecu's also now. Just wondering if anyone here on the forum with a yamaha has used them,
  11. Replies
    4
    Views
    317

    ecu re prograhaming question?

    Has anyone ever used or know anything about www.racelabperformance.com for ecu re prograhaming service?
  12. get some aftermarket sponsons and try then first.

    get some aftermarket sponsons and try then first.
  13. Replies
    17
    Views
    477

    This will also help with the brake in of your new...

    This will also help with the brake in of your new parts, try not to run your ski at full throttle for the next tank of gas give the engine some brake in time.
  14. Replies
    17
    Views
    477

    glad you found the problem, your motor should be...

    glad you found the problem, your motor should be just fine. You might want to add some extra 2 stroke oil in your next tank of fuel to provide a little extra lubrication to slick the crank and...
  15. Replies
    17
    Views
    477

    for some reason i thought you were working on a...

    for some reason i thought you were working on a gpr 1200 motor. now that i see this is a 2 cyl motor i am not sure the forum information is correct. How ever is is very easy to get the head gasket...
  16. Replies
    17
    Views
    477

    use a air hose to blow out the crank real good....

    use a air hose to blow out the crank real good. then oil up the rod and side bearings with 2 stroke oil then re assemble engine and you should be good.
  17. Replies
    17
    Views
    477

    if you have water in sparkplug holes it is a base...

    if you have water in sparkplug holes it is a base gasket problem more than likely. they are on wrong.
  18. Replies
    17
    Views
    477

    check the black plastic piece that feeds water to...

    check the black plastic piece that feeds water to the metal exhaust manifold I have seen them crack and leak lots of water into the hull.
  19. Replies
    2
    Views
    184

    those lines appear to be casting slag lines and...

    those lines appear to be casting slag lines and not cracks. Take some 250 to 300 grit sand paper and sand the entire grate REAL GOOD by hand and you will see those lines will be gone. If after hand...
  20. Replies
    27
    Views
    2,620

    The correct deka battery is ETX16L for your...

    The correct deka battery is ETX16L for your ski. the difference is the plus and neg. post are reversed on a ETX16 and a ETX16L You can use the ETX16 as most yamaha have long enough cables to...
  21. Replies
    27
    Views
    2,620

    Take the battery out and look at the battery case...

    Take the battery out and look at the battery case there are two fluid level lines on the battery min. and max. I bet the fluid level is still well above the max. line even though you have lost acid...
  22. Replies
    18
    Views
    1,804

    the trim helps some when trimmed for bow up, keep...

    the trim helps some when trimmed for bow up, keep most of your extra storage items in the back if the ski and a empty front compartment, shift your body weight to the rear of the seat as best as you...
  23. Replies
    27
    Views
    2,620

    That was a nice jester by the dealer.

    That was a nice jester by the dealer.
  24. Replies
    27
    Views
    2,620

    I agree but that is what comes with the ski. I...

    I agree but that is what comes with the ski. I was a Yamaha/ Harley-Davidson/ Polaris dealer for 30 years before I sold out and retired and then was the Crew Chief for Fountian Powerboats offshore...
  25. Replies
    632
    Views
    117,851

    Riva makes a stainless grate now. It may be 1 to...

    Riva makes a stainless grate now. It may be 1 to 2 mph slower than a R&D but it works good. Buy it through the greenhulk performance store use the "greenhulk" code for a 10% discount and they are top...
Results 1 to 25 of 200
Page 1 of 8 1 2 3 4