Search

No heat as I did not want to risk damaging the driveshaft water seals in the hub, right behind the impeller.

The key is to have a REALLY stable support for the jet pump and for the levered tools...

Without other modifcations it seems unlikely that anything more than the factory OEM air filter will make any noticable difference.

If you want to start making changes, there are things that can...

Please share and like and subscribe to the GreenHulk Garage YouTube channel


https://youtu.be/NvDkM3Rm1YY

https://impros.com/store/

Website works for me.

Impros - The Impeller Professionals
38959 Cherry Estates Circle,
Cherry Valley, California
92223

(951) 737-2900

Maybe I will hit you up this summer. Thanks!

Yes, the 2021 HO pump is updated. You will find it on this page of the forums store in section propulsion system - external...

I wanted to take a minute to introduce my son Greg Gaddis who goes by GreenHulk Jr on the forum. Greg is going to start helping me with installing, testing and documenting gains once we start adding...

I'm assuming if you just cut the wire at the hull connector (on outside ski) that it will not leak through the connector, correct? I cut mine this weekend and put alittle silicone on the exposed...

I remove the wire. I cut it, and then the through hull fitting you can unscrew with you hand. and then pull cable from the inside. wire will pull through. then can pull the bare wire out of each...

no, you unplugged them on the other end when you installed your CandooPro module.

Remove it, cut the wire off with wire cutters where it enters the hull and toss it in the garbage :)