Search

Hello,

My 95 WR3 has no spark. Just bought it. Seller said it abruptly quit while running on a garden hose. I pulled a known good cdi out of my 93, installed it and still no spark. Ohms were...

K447, You are the man. Thanks for the info.

Should I mess with a Genesis at all? I like it for family riding; very comfortable and fast. Good for tubing. Maybe I'll just wait for a nice, stock...

What motor would you put in a Genesis hull? Non power valve Yamaha 1200 with a milled head?

The stock engine is a 1200 with 135 hp. The 787 makes 110 hp. I really liked my old genesis. I’ll be watching for a motor

I have access to a free Genesis hull. How tough is it to drop in a Sea Doo 787 running premix?

20 psi for four days. No change. $60 on EBay.

Gentlemen, I have disconnected the cable at both ends and the issue is the cable. I have hooked up 30 psi pressure to a tube filled with WD-40 and have managed to get about an ounce or two into the...

Hello gang,

trying to remove 97 GTX starter to swap into my 97 XP. Front two bolts are out. Rear bolt will not accept a 6mm alan. 5.5 is too small. Pics show something inside head of bolt.

What is the Seal Unit? I am sorry, do you mean the seal on the shaft? I replaced that on mine. I also had to replace the 7.5 amp fuse (was getting the single click when trying to run the VTS.) I...

02 Genesis I 54 speedo, 6720 RPM (Nicest ski ever made IMHO)

Where did you buy the seal kit and grate?

Tried to remove the carbs tonight. Stripped the top forward bolt. It was easy to remove from the engine, but it spins the carb when trying to loosen. Only about a turn or two to go and it stripped...

No, it was just a few mm forward or aft. I don't know. Not the extension you are talking about.

I don't know the dimensions of it, but the ski had a bunch more low end and could pull a skier up on two skis.

4th of July, Chesapeake bay, super low tide, best friend ran it aground. Wouldn't even pull a tube on plane. major gouges on SS wear ring. Had a friend do a "summer fix" with a newer impeller and a...

I have looked at that wear ring as well. Don't know how to remove and replace though.

Do you still have this?

Where can I get a new wear ring for my 02 Genesis I? I have seen the wear ring on ebay for $99 but I don't know how to swap it out without special tools. Seems easier to...

Just did the wear ring. Much better hook up. Also slid the carbon seal boot forward about 1/4 inch.

Still cavitating a bit. Will do the SBT impeller soon.

Next will be the fuel lines and...

Here is one more pic of my new ski.

Just bought a 97 SPX to restore. About 160 psi both cylinders. Engine sounds great. VTS had a blown 7.5 fuse and water in from cracked boot.

Cavitated horribly on first ride. Removed pump. ...

What in the housing needs to be replaced?

The guy sells polaris parts on the Annapolis Craigslist site.

He doesn't have time for a water test, so I offered him $300 apiece w/o the trailer figuring they would require engine rebuilding. He said no.

Looking to get a Waveblaster 1 with a mod pipe. Was interested in a Sea Doo X4 800, but the WB 1 looks like it would be a ton of fun.

I have a SN with 760, B-pipe, ride plate, and scoop grate. Lots of fun. Only had 550JS's before. I have heard from some guys in the business that the SN hull exhaust tube can't quite keep up with...