Search

Type: Posts; User: Jonesyfxr

Search: Search took 0.00 seconds.

  1. Check the speedo wheel on the back of the ski. I...

    Check the speedo wheel on the back of the ski. I forget what color the pug is… that may be your issue.
  2. Glad you low what’s wrong. You should have it...

    Glad you low what’s wrong. You should have it sorted out shortly then.
  3. It almost sounds like something is going on with...

    It almost sounds like something is going on with high circuits.
  4. You need to use the pilot jet (low).

    You need to use the pilot jet (low).
  5. The jet size would dictate your fuel pressure. A...

    The jet size would dictate your fuel pressure. A larger jet means lower pressure and vice versa. I’d use the 90 as a starting point.
  6. http://greenhulk.net/forums/showthread.php?t=9408

    http://greenhulk.net/forums/showthread.php?t=9408
  7. I re-read your post. The tank is not supposed to...

    I re-read your post. The tank is not supposed to pressurize…. This is the check valve I was speaking of. There’s 4 fittings on the tank, as you’re aware since the sending unit was removed. 2 feed...
  8. If the RPM's hang, that's usually a sign of an...

    If the RPM's hang, that's usually a sign of an air leak in the engine somewhere. We thought we had an air leak and pressure tested the crankcase.... it passed the leak-down test. Since the ski is...
  9. Not the flapper in the tank..... on the vent...

    Not the flapper in the tank..... on the vent line.

    This is a very hard thread to follow, there's a lot going on with your ski with lots of changes at once. This makes it hard to help diagnose a...
  10. Make sure the check valve is working on the tank....

    Make sure the check valve is working on the tank.

    We followed the Oside Bill recipe and the ski runs great.

    This speed was with stock prop and 3/4 tank of fuel.
  11. Is the throttle hanging up or is the ski running...

    Is the throttle hanging up or is the ski running away?
  12. There aren’t any gaskets for the reed cages. Guys...

    There aren’t any gaskets for the reed cages. Guys are using, including myself, permatex to seal them up.
  13. If you use a light coat of grease on everything...

    If you use a light coat of grease on everything during assembly you can reuse the gaskets, prevents sticking.
  14. I was taught to use a light coating of grease on...

    I was taught to use a light coating of grease on the gaskets to aid in sealing them. After our carbs were rebuilt it primed in seconds. You may have a slight leak at your fuel line fittings.
    ...
Results 1 to 14 of 14