Search

Type: Posts; User: K447

Search: Search took 0.11 seconds.

  1. Replies
    22
    Views
    579

    Which impact tool are you using?

    Which impact tool are you using?
  2. Replies
    22
    Views
    579

    Impeller blade to wear ring gap clearance,...

    Impeller blade to wear ring gap clearance, measured with feeler gauge - optimal is 0.010” or less.

    0.020” is considered the maximum ‘acceptable’ gap, but some small amount of performance will be...
  3. Replies
    22
    Views
    579

    There are two sintered metal bushings inside the...

    There are two sintered metal bushings inside the bearing assembly. They are made with Teflon impregnated material but still require the internal cavity to be kept well greased with water resistant...
  4. Replies
    22
    Views
    579

    BTW, did you remove the ride plate to gain better...

    BTW, did you remove the ride plate to gain better access to the jet pump base area?

    If you change/replace the jet pump base then you should also replace the two seals with new.

    And check the...
  5. Replies
    22
    Views
    579

    Interesting, as I never use impact tools on the...

    Interesting, as I never use impact tools on the four long jet pump bolts. The length of the stainless steel bolts seems to twist and absorb most the impact tool energy. At least with the impact tools...
  6. Replies
    22
    Views
    579

    Always helps to identify the Polaris model and...

    Always helps to identify the Polaris model and year you are working on ;)
Results 1 to 6 of 6