Search

To verify the injectors are on the correct cylinder, you would only require DW, not a QR code reader. The injectors have S/N on their labels which are also displayed in DW. The only instance a QR...

bspanovic is the other Australian member. I believe he resides in Sydney. I don't know if that is close or not.

swan is a member in Australia and I'm pretty sure he has DW. I do't know what part of the country he resides within. He's a great guy. Utilize the forum's private message to reach out to him

We...

He indicated he was from Australia. We have a few members there who have Digital Wrench (DW), the diagnostic software. With that and a cell phone QR code reader, you can determine if the injectors...

Yes, I suggested it and provided the bill of materials to a member who had broke off the return line hose barb from the nylon head piece, last summer.

I've also encountered a near identical...

It's more of a yellow. It is Valvoline X-All grease. I apply a coat to the hose barb to aide with seating the hose. It is especially helpful when installing 1/4" hose on a 5/16" barb---which also...

I've been working on my 2020/2021 winter project PWC, a 2003 Virage i. Upon removing the fuel canister and visually inspecting the fuel pressure regulator (FPR), I thought I had received a "free...

See post #3 of this thread for the link.

I have a project Virage i that has a crack in the cylinder casting along the mold line, from top to bottom. I'm seeking a serviceable replacement.

No good deed goes unpunished. I had a complete...

C43 replacement:

https://www.digikey.com/en/products/detail/vishay-bc-components/MKP1839468084HQ/2260510

I should be able to supply that. $20 shipped. If you're interested, PM me and also let me know which color you need, black or creme.

PNs forthe fuel line and clamps. Link to the fuel line source.

Could be contaminated fuel. See this thread.

Here is what you need for hose and clamps. I just copied it from another thread. Maybe k447 would include it in his info pages as I've sent it a number of times to various members:

You'll also...

I've never had an issue with them, but I don't twist or pull on the hose to remove it. I remove the injector retainer bracket and then pull the barb fitting from the injector. I lay the...

The link is in post #3 of this thread.

I'll sell the seat for $450 and drop it off at the local UPS Store. Once I deliver it to the store, its yours. Here is a link to their web page if you want to contact them about shipping.

It is...

PM sent.

I have a new one, in the wrapper. The shipping would surely be a deal killer. I've done two re-upholsters with the Hydro-Turf seat covers and have been pleased with the results. That being said,...

You are correct. I had Virage on the brain.

That bolt is retained by a slotted "L" bracket attached to the motor mount stud. The motor mount should be barely snug, so the "L" bracket can move in the slot when tightening the resonator to "L"...

Blasphemer!

You can swap an injector from one cylinder to the other for a brief test run.

After that, you're down to the EMM, in my opinion. Lakeside Tech will perform an analyst of of your EMM for a nominal...

Spark plug wire? Swap with another cylinder.

If it is cosmetically good, $400 would likely be less than repairing what you have. While I agree it is a rich price, but when you start to look at what it will cost to refinish (paint) a repaired...