Search

Type: Posts; User: K447

Search: Search took 0.11 seconds.

  1. Sticky: Riva yamaha 1.8l sho/svho billet throttle body adapter / mount

    454844

    Apparently Riva now sells it in black.

    http://greenhulk.net/forums/showthread.php?t=283059&p=3047763&viewfull=1#post3047763
  2. Sticky: There are eight fasteners across the SVHO intake...

    There are eight fasteners across the SVHO intake manifold plus the two support brackets below.

    http://www.greenhulk.net/forums/showthread.php?t=260795&p=2873404&viewfull=1#post2873404
  3. Sticky: You could also click on the +1 icon ;)

    You could also click on the +1 icon ;)
  4. Sticky: Check everything again. Especially the hard to...

    Check everything again. Especially the hard to see items.

    Only when you are certain you have not forgotten anything, should you reconnect the battery.

    Have a clean and dry shop rag on hand and...
  5. Sticky: Engine fully re-assembled. Note: I...

    Engine fully re-assembled.

    Note: I permanently removed the decorative black plastic shroud that normally covers the top of the engine, and I also removed the four metal support brackets for the...
  6. Sticky: On the first engine I removed the rubber J tube...

    On the first engine I removed the rubber J tube from the intercooler, so this is what it would look like in position. In this photo the J tube is not fully seated onto the throttle body and the gear...
  7. Sticky: Factory OEM throttle body configuration. ...

    Factory OEM throttle body configuration.

    http://www.greenhulk.net/forums/attachment.php?attachmentid=416964&stc=1

    http://www.greenhulk.net/forums/attachment.php?attachmentid=416963&stc=1
    ...
  8. Sticky: There are two nuts and two bolts across the top...

    There are two nuts and two bolts across the top of intake manifold. And another four bolts tucked below.

    Remove all eight. Also remove the two vertical bolts holding the support brackets to the...
  9. Sticky: Before I removed the intake manifold bolts, the...

    Before I removed the intake manifold bolts, the fuel rail and wire harness needs to be moved aside.

    Note: Remove the lanyard and disconnect battery.

    Note: Open the gas filler cap to release...
  10. Sticky: How to remove SVHO throttle body prior to ribbon removal, IMUK upgrade

    I am learning more about working on the SVHO engine in the 2017 GP1800. I thought it might be useful to document the process I used to install these two items.

    I found the provided paper...
Results 1 to 10 of 10