Search

Page 1 of 2 1 2

Search: Search took 1.00 seconds.

  1. Replies
    10
    Views
    1,499

    Very cheap and easy fix to replace a valve. It...

    Very cheap and easy fix to replace a valve. It would have sat at a dealer for weeks before they even touched it. Plus, they would just put another intake manifold on it with the exact same issue....
  2. Replies
    10
    Views
    1,499

    Svho engine failure

    We dropped a valve from the flame arrestor pushing through the intake manifold. PLEASE get an intake manifold upgrade kit for your 2018+ SVHO engine to avoid this problem all together.
    ...
  3. GP1800R Riva Racing STEERING & SPONSONS INSTALL

    https://youtu.be/c2hj8GoOzyc
  4. Thanks for sharing.Your findings are actually...

    Thanks for sharing.Your findings are actually what we've been seeing on pretty much every ski we've tried Riva grates on going back to the GPR days.They usually use an offshore design that scoops up...
  5. Stock nozzle and cone. Stock steering nozzle as...

    Stock nozzle and cone. Stock steering nozzle as well.


    went and did some tests today. I used the riva gen 2 ride plate today as it stuffs WAYYY low mph with that plate I’m assuming due to the...
  6. You are using a pump seal kit to completely fill...

    You are using a pump seal kit to completely fill the voids in the back face of the intake grate, correct?

    Are you applying sealant to the curved back rim of the intake grate to seal it to the...
  7. Yes, I measured it. It’s 160mm. I know some got...

    Yes, I measured it. It’s 160mm. I know some got the 155 and there’s a recall for it I believe. But when I brought mine in it had the 160.


    here’s a clean pass today. I only got 85 GPS and I was...
  8. It’s pump tunnel pressure I believe. I had the...

    It’s pump tunnel pressure I believe. I had the spout blocked off but I also thought the same thing so I uncapped it. I have everything sealed up really well including the transom and intake grate to...
  9. Here is a video I just made from today this is...

    Here is a video I just made from today this is the stock intake grate stock ride plate and solas 13/18 with the cone on. I took the pump off this morning and checked everything and also installed the...
  10. Replies
    19
    Views
    1,516

    478203 This seems to be a really good tach I...

    478203
    This seems to be a really good tach I spoke to a couple of people who have been using tachs for years and they swear by this one. Ordered it off of eBay from Japan.
  11. Replies
    19
    Views
    1,516

    Tach setup

    http://greenhulk.net/forums/attachment.php?attachmentid=478200&stc=1
    http://greenhulk.net/forums/attachment.php?attachmentid=478201&stc=1
    478202
    That looks like the converter. 1,2,7 on position...
  12. 101 MPH Yamaha Fzr with the Stock 2018 super charger wheel Project! LMR Built & Tuned

    https://youtu.be/8B1wbT4zdNc
  13. Thread: My 1200r

    by Jonesyfxr
    Replies
    20
    Views
    1,962

    Unfortunately our Advent died and the guy we...

    Unfortunately our Advent died and the guy we bought it from ghosted us… so back to stock ignition for now. We already have a whole shot kit, PROK’s, drilled windscreen and storage bucket, 5* ride...
  14. Replies
    12
    Views
    1,025

    I live in Connecticut so the water gets to about...

    I live in Connecticut so the water gets to about 75 nocooling mods needed oh and I forgot Jim's cut on the ride plate
  15. Replies
    19
    Views
    1,516

    http://greenhulk.net/forums/attachment.php?attachm...

    http://greenhulk.net/forums/attachment.php?attachmentid=477768&stc=1
  16. Replies
    19
    Views
    1,516

    When the TTO tach was working it was spot on with...

    When the TTO tach was working it was spot on with it, and it hasn't missed a beat in over 80 hrs.
  17. Replies
    22
    Views
    1,493

    These Tabs

    These Tabs
  18. Replies
    22
    Views
    1,493

    I used two of the small packages of JB Weld. I...

    I used two of the small packages of JB Weld. I taped up the edges so it was easy not to make a mess. To fill the round holes, I just used some of that plumbers GOOP. It’s an adhesive silicone that...
  19. Replies
    22
    Views
    1,493

    Transom plate reseal

    I know itís been posted here many times but I cannot stress enough that everybody who owns a Yamaha MUST reseal the transom plate. I got my 2021 GP1800R SVHO back in October of 2020 and on my first...
  20. Replies
    5
    Views
    446

    Helpful hint for installing a BOV

    Hey guys…starting a new, clean thread. Many of us have installed a BOV. The proper way would seem to be to run the vacuum line to the intake which as many know, requires the removal of the intake...
  21. without doubt, you have an exhaust leak losing...

    without doubt, you have an exhaust leak

    losing the cooling line for the exhaust will certainly damage one of the rubber couplers

    could be a sneaky leak that doesn't appear when backflushing,...
  22. Correct, the impeller tool is included. you only...

    Correct, the impeller tool is included. you only need to purchase a shaft holding tool https://www.4-tecperformance.com/index.php?main_page=product_info&cPath=350_94_96&products_id=1831

    Thank you...
  23. cool man thanks for posting

    cool man thanks for posting
  24. Sticky: Get instant MaptunerX tuning licenses in the GreenHulk Store! No more waiting!

    Guys, it took a lot of fancy programming, but it's been well worth it. I'm pleased to announce that you can now buy a MaptunerX Tuning License in the GreenHulk Store and you get your license emailed...
  25. I would try it this way to see how it works for...

    I would try it this way to see how it works for you, or while you have it apart drill it out as Riva recommends
Results 1 to 25 of 32
Page 1 of 2 1 2