Search

Amd here is a link to the dash setup: https://www.aemelectronics.com/products/cd-digital-dash-displays-adapter-harnesses/cd-5-carbon-digital-racing-dash-displays

http://greenhulk.net/forums/attachment.php?attachmentid=470529&stc=1

for reference

I see the fsm shows the yellow/blue wire from the display goes to the ecu for slow mode. Holding the “mode” button for 7 seconds or more is supposed to put the ecu into “slo” mode. So what signal is...

Yes it is. IP 66 rated. The Holley digital dash is also “weather proof”. IP 65 I believe. Just sorting out the slo mode bypass. The aem dash can read can feeds from a huge variety of sources. Wonder...

Just to advance this topic a bit. I’ve been planning to swap in an aem digital dash for a modern look with more gauge read outs. Will be selling my refurbished gauge setup.

Really interested in how that T3r performs 2 up. I think I’ve narrowed it down to the gtx 170 in black, rxtx in yellow or rxpx (pending 2uo handling review)

Is it worse than the 06 rxp? We handled 2 up on that hull in the ocean without any problem but I haven’t ridden the t3/r hull at all. I do know it’s better than riding 2uo on my 96 XP though lol....

Been a diehard Seadoo fan for 2 decades now and grew up on XP’s. Ride my stage 2 rxp for a couple years and then had to sel and have been on a custom kawi for a while now. Ski will be used only in...

8 years later... So any info on what fits the solas pumps? Solas is not a company that responds to direct inquiries, at least not normally from customers. Solas website has little to no info. The...

Same here, can’t see the pics

Compressed air with a 1/2" hose barb adapter works well also for getting out water that's collected.

Why do I still have this ride plate??? Will put it up on eBay in a few days if no one wants it.

I doubt the OP is still wondering which fuel to use. The stock Riva tune is for 93 octane pump gas. It would take a significant more amount of compression and or timing to require 109. At 12.5:1 93...

Have a nice R&D ride plate with reverse brackets for a 15f. I believe it also fits the newer 160 models. $300 shipping is about $25. Thanks

VR1, oem, amsoil they all will work just fine. Clean oil and good maintenance is far more critical. The posts so far come from very knowledgeable people who have a lot of experience with these...

So I swapped on the factory plate and did a lot of tweaking. Mounting, testing, removing, repeat. I finally got the ride I was after. The ride now is smooth with zero porpoising. The oem plate is...

Added the Yamaha audio system for the VX today. Works awesome. Also did the gps speedo and a lot of ride plate truing with the oem plate. Will report results.

I guess I’ll be the first to ask, what are you trying to accomplish? I ride only salt also but have never seen internal corrosion on a properly stored and fogged engine. Are you after performance,...

It’s a good practice to get into for sure. Wd-40 is what some of us have been using to fog with good results. Just the plain stuff

If you find it and can post the link here that would be great. It would be nice to keep these tech/mod threads together. Seems like they tend to die off without the op posting results. I’ll keep up...

Thanks Jerry!

Nice! Glad to hear it.

Ill give that a try. It may be my grate is causing some of the porpoising but it does stay hooked up well across the chop. Was about to remove the R&D plate and install the oem one but if I can get...

im running the worx grate. Here are some pics of my setup. I didn’t mod the shape of the hull...

I like the setup you had on your nasty build. How well did they work for you?