Search

Type: Posts; User: bspanovic

Page 1 of 8 1 2 3 4

Search: Search took 0.32 seconds.

  1. Sticky: Great info. Thanx.:)

    Great info. Thanx.:)
  2. Welcome to GH. It could be a tricky job to fix...

    Welcome to GH.

    It could be a tricky job to fix this. I would open EMM and solder a jumper wire on PCB between unused pin 39 to # 40s copper trace on the board near the connector..
    It would also...
  3. Possible but unlikely that pin (socket) 5 is not...

    Possible but unlikely that pin (socket) 5 is not inside the 40 Deutsch connector or that somebody before had removed it. Black wire #24 is present and inside the connector? If so, you will need to...
  4. Looks like you have some wiring issues there....

    Looks like you have some wiring issues there. Locate and open the black cable splice of four black wires as per electrical block diagram. Remove the big 40 pin from EMM and measure the resistance...
  5. Replies
    4
    Views
    153

    FS Thanks for pointing out on this bug. The images...

    Thanks for pointing out on this bug. The images should be visible now.

    Cheers
  6. Replies
    4
    Views
    153

    FS Yes, I have one pigtail and one non-pigtail style...

    Yes, I have one pigtail and one non-pigtail style TPS.
    All prices include international shipping including US.
    I am using Chrome browser and can see the two attached photos....@K447, are you using...
  7. Replies
    4
    Views
    153

    FS TPS & LR503 Sale

    http://greenhulk.net/forums/attachment.php?attachmentid=461091&stc=1http://greenhulk.net/forums/attachment.php?attachmentid=461092&stc=1
    ...
  8. Replies
    159
    Views
    3,426

    Not likely. You said that one spark is weak and...

    Not likely. You said that one spark is weak and the other one is good. Did you have observe the colour and the size of the spark while the spark plug shorted on engine block and outside the cylinder...
  9. I would start with the obvious and fix the very...

    I would start with the obvious and fix the very important white/red wire and the large capacitor....
    If you remove big 40 pin connector from EMM (undo 4mm alen first) you will end up with the...
  10. Although just outside the spec I would say the...

    Although just outside the spec I would say the sensors are ok. I would look for a spare exhaust temp sensor and try out. Was this a salt water ski, is the wiring in generally good condition? Have you...
  11. Replies
    11
    Views
    249

    Yes, the lowest octane gasoline we get here is...

    Yes, the lowest octane gasoline we get here is 91. 95 or 98 octane is recommended for newer type of vehicles. In ethanol range we get E10 (marketed as 94 octane) and E85 (marketed as 105 octane)....
  12. Replies
    11
    Views
    249

    Thanks, years ago I did try 91,95 and 98 (all...

    Thanks, years ago I did try 91,95 and 98 (all ethanol free) octane petrol in my DI engines. I didn't notice much difference in performance between 95 and 98 while 91 was very close. The riding...
  13. Replies
    11
    Views
    249

    So how can fuel pre ignite without spark? By...

    So how can fuel pre ignite without spark? By excessive heat? I know diesel would ignite on high pressure but not gas/petrol?
  14. Replies
    11
    Views
    249

    Why is that?

    Why is that?
  15. Replies
    6
    Views
    616

    FS looking for a 12 vane stator....missed out on K's...

    looking for a 12 vane stator....missed out on K's stator when he moved to 4 strokes
  16. Replies
    17
    Views
    526

    If you end up having a bad TPS I have one spare....

    If you end up having a bad TPS I have one spare. PM if interested
  17. Replies
    17
    Views
    526

    Have you torqued the 2 bolts as per the book's...

    Have you torqued the 2 bolts as per the book's specs? Have you tried having TPS in your hand and move the shaft with your fingers while engine is working? Does the ski start without TPS plugged in...
  18. Replies
    7
    Views
    404

    If ain't broken don't fix it... but either way do...

    If ain't broken don't fix it... but either way do not use WD40 or similar oil based products on electrical connectors. Oil is an insulator and the electrical connectors don't like it. There is a...
  19. Replies
    9
    Views
    349

    Check carefully your oil hoses from the pump into...

    Check carefully your oil hoses from the pump into the throttle body. The PTO hose on one of my skis got bruised by touching the throttle body and got porous. It took me a good look with mag glasses...
  20. I prefer solder over any type of crimping when...

    I prefer solder over any type of crimping when repairing wires/connectors on the electrical harness'. Applying the correct size of heat shrink will seal off the exposed wires and sometimes using the...
  21. Replies
    15
    Views
    583

    If you are looking for a spare EMM I would...

    If you are looking for a spare EMM I would recommend to look for #9999999 serial no's as they were the replacements units.
    I think the last EMM made for Polaris were in 2010. Otherwise, the best...
  22. I recommend silicon, it will stay on for good and...

    I recommend silicon, it will stay on for good and you wont need an air compressor to blow it out the coupler..
  23. FS - Parts PM sent

    PM sent
  24. Replies
    5
    Views
    320

    Agree, an overheating EMM will not show warning...

    Agree, an overheating EMM will not show warning on MFI
  25. Replies
    47
    Views
    2,626

    54C max EMM temp is not alarming. Typically, it...

    54C max EMM temp is not alarming. Typically, it would take about 45 min for EMM without cooling to heat up. EMM will still work but the idle revs would creep up. Once EMM overheats there is a very...
Results 1 to 25 of 181
Page 1 of 8 1 2 3 4