Search

Muriatic acid?

I want the cylinder

I think that’s the cylinder I need. I have a 2005 xlt1200

very interesting but do they tell you how to fix the issue?

Melted a piston as soon as I got this thing (Front cylinder )so I replaced cylinder all new top end rebuild kit. I followed the directions closely on how to rebuild the carbs with new jets. All good...

Melted a piston as soon as I got this thing (Front cylinder )so I replaced cylinder all new top end rebuild kit. I followed the directions closely on how to rebuild the carbs with new jets. All good...

tried to fire up my ski today and nothing but some click in the electric box. bought a new battery and same thing. pulled the jet pump and was able to insert the drive shaft and the crank will turn...

THANKS!!!!!!!! I unplugged the MFD and that worked...WTF....lol.

I would have never found this without your help, I’m just pissed I didn’t post when i first had this problem. I spent 3 weekends...

How do i get the MFD out of the handlebars? Do i just pry it out?

Yes i believe it always would redline on the trailer. I will see if the cylinders are getting warn. I did install new fuel lines and i never had an in-line fuel filter as long as i have had it. I...

The reeds looked good when i had the carbs off. I have not tried the ski in the water only starting on the trailer getting ready for the season

Will not get full RPM’s. Don’t know exactly what I’m getting because the gauge doesn’t work but i have had this ski for around 7 years and know what it should be Revving to.

I tried everything i...

Ok finally putting this thing together with new top end ,new cylinder ,carbs with chokes intact with the 110-1 turn and 120 1.5 turn ,1.5 needle and pop off in the 42 to 45 ,stock air box with holes...

[/QUOTE]I have never rebuilt an engine before and not sure i can tackle it or what it would cost. If I do get into it further I'll post my findings and results to hopefully help out others....

if thats how the PV fails what good are the wave eater clips? I just got a set for my xlt 1200 and will b installing this weekend....i really didnt see the need for but i will install them

Yes, If it's a 95.

Why don't we start with what specific ski you're talking about.

I'm presuming GPR.[/QUOTE]
2005 XLT 1200. I just picked up a 95 main jet

can I use the original main jet for this mod? it was a 117.5

how do i do preasure test?? I guess I could search this site...im still waiting on the carb parts so i have nothing to do on it this weekend other than drilling the return and tapping the T for the...

I guess i missed this mod but i just ordered the 95 main jet for the return

I cant see how that pin could come out of the PV

Are u saying that from the picture of the head or the picture of the oring? I ordered all the jets , needle valves and new OEM Mikuni rebuild kits....another $250 on top of top end erbuild kit $360...

i am not looking for speed im just looking for it to start and run reliably ....i have a 96 polaris ive had for about 7 years and i have never had to touch the motor....it just runs....i never even...

so how much adjustment will i have to do if i use those settings and how will i know if the high or the low needs adjusting??

What is the advantage of taking the chokes off or the disadvantage of leaving them on

I want to do it correct the first time but im out of cash and dont have rhe $300 for FA's with adaptors and condoms. I just spent around $800 on top end rebuild kit,new cylender,carb kits....this...