Search

Type: Posts; User: ptscon

Page 1 of 8 1 2 3 4

Search: Search took 0.03 seconds.

  1. Fill her up and go rip it!

    Fill her up and go rip it!
  2. I think the issue was the clamps were not...

    I think the issue was the clamps were not installed correctly, either too loose or in the wrong spot on the fittings so they would pop off.

    Probably a good practice to go over all the hose clamps...
  3. Normal if flakes are magnetic. These engines...

    Normal if flakes are magnetic.

    These engines starter gear engages within the oil system so anything that gets knocked off the gears ends up in oil and shortly in the filter.
  4. Will be running same cam as I do in my current...

    Will be running same cam as I do in my current 260 https://activejetsport.com/product/seadoo-race-camshaft/ still deciding between 135 or 142 charger.
  5. Awesome numbers for those mods, I'll be slapping...

    Awesome numbers for those mods, I'll be slapping on a larger charger and a cam when mine arrives.
  6. Replies
    3
    Views
    143

    Usually, rocker arm breaks when there's a...

    Usually, rocker arm breaks when there's a significant impact between a valve and a piston. Not saying that's what happened in your case but double check.
  7. Replies
    4
    Views
    154

    SOLD PM sent

    PM sent
  8. Replies
    4
    Views
    154

    SOLD Ya saw that but I think he has a new one, I'd...

    Ya saw that but I think he has a new one, I'd prefer used to save some coin.
  9. Replies
    4
    Views
    154

    SOLD Looking for a used ET135 wheel

    As the title says, I'm looking for a used ET135 +spacer kit. If you have one PM me with price.
  10. Replies
    11
    Views
    1,105

    Link?

    Link?
  11. Replies
    11
    Views
    1,105

    What kind of gains are they seeing with retarded...

    What kind of gains are they seeing with retarded cam on 300?
  12. Replies
    23
    Views
    1,875

    Just grab aftermarket thats a clone of OEM and...

    Just grab aftermarket thats a clone of OEM and can use OEM gasket and bolts. I see nothing special about the generic Bosch ones seeing as the OEM is Bosch and we all know how great those are.

    ...
  13. Replies
    23
    Views
    1,875

    Replace, that looks nasty, the inside is probably...

    Replace, that looks nasty, the inside is probably full of salt corrosion.
  14. Replies
    5
    Views
    594

    FS - Parts Still available

    Still available
  15. As long as both tunes do not touch timing or if...

    As long as both tunes do not touch timing or if they do both have the same change % wise.

    These machines are so even, PX should win drag races up to stage-1 thanks to launch it has. GP will start...
  16. Replies
    4
    Views
    254

    Not perfect but acceptable, especially for a 16...

    Not perfect but acceptable, especially for a 16 year old machine.
  17. The RXP was doing 8200-8300 according to...

    The RXP was doing 8200-8300 according to comments, would guess the GP would be similar closer to lower range.
  18. Replies
    4
    Views
    254

    Hold the throttle wide open while cranking, it...

    Hold the throttle wide open while cranking, it puts the ski in "drown mode" which disables fuel and ignition.
  19. Thread: Vipec V88R3

    by ptscon
    Replies
    2
    Views
    423

    FS - Parts burp!

    burp!
  20. Replies
    7
    Views
    342

    I agree with going by rotation after seated by...

    I agree with going by rotation after seated by hand but one important note is there's a big difference between brand new plugs with un-crashed washer and one that has been previously installed and...
  21. On my PX260 I didn't have to remove anything to...

    On my PX260 I didn't have to remove anything to get to it. It was a tight squeeze and had to do it by feel but it wasn't a big deal. The sensor is above the oil level so no need to drain it.

    Once...
  22. It's just one bolt holding it but it's located...

    It's just one bolt holding it but it's located very low on the engine, almost under, and seeing as you have a "is" machine it might require pulling the top deck.
  23. If you need guides PM me, I have a brand new set...

    If you need guides PM me, I have a brand new set of brass guides.
  24. I guess we know where the stimulus checks are...

    I guess we know where the stimulus checks are going.

    Geez Riva, you went from charging arm and a leg to arm, leg and left nut.
  25. Yes T3 is great when hitting chop head on but if...

    Yes T3 is great when hitting chop head on but if you start hitting it at any angle it's when it really wakes you up. The deep hull wants to follow the chop, great workout for wrists and arms.
Results 1 to 25 of 200
Page 1 of 8 1 2 3 4