Search

Type: Posts; User: dcuhpw

Page 1 of 8 1 2 3 4

Search: Search took 0.05 seconds.

  1. Replies
    6
    Views
    248

    Does it even try to fire up? My issue that Sean...

    Does it even try to fire up? My issue that Sean mentioned was the start/stop button feeding the ecu. It would crank the starter all day but wouldn’t send power to the ecu while cranking. The...
  2. Replies
    8
    Views
    194

    The fuel “filter” on that ski is just the sock...

    The fuel “filter” on that ski is just the sock strainer in the tank. You can grab a replacement from kawi but just take it in to your local auto parts store and they can match something that fits.
  3. Replies
    46
    Views
    2,378

    That looks like the little Toyota van...

    That looks like the little Toyota van superchargers. Personally I’d recommend you stick with the ogura. Swapping to the Eaton supercharger is very very complex and is not just a matter of building...
  4. Replies
    8
    Views
    194

    Yep they are yellow and Orange on the old...

    Yep they are yellow and Orange on the old machines. Hook up a pressure tester and test it at different rpms. Also try revving slowly and quickly to simulate different loads. It’s true the fuel map...
  5. Replies
    46
    Views
    2,378

    Do you mean a different model supercharger that...

    Do you mean a different model supercharger that fits the ski?
  6. Replies
    104
    Views
    5,224

    Got a chance to take the ski out today and the...

    Got a chance to take the ski out today and the pump wedge made a huge difference in handling. Porpoising has stopped and it cuts through chop much better now. Have an exhaust leak at the couple and...
  7. Replies
    92
    Views
    2,885

    Yeah, I wouldn’t use the 3.5” digital dash that...

    Yeah, I wouldn’t use the 3.5” digital dash that comes with it out in the open. You could build a little enclosure for it though. I think the larger dashes are sealed but check with Holley. I’ve used...
  8. Replies
    92
    Views
    2,885

    In the auto world I’ve been running Holley fuel...

    In the auto world I’ve been running Holley fuel injection. The new terminator x may be a pretty sweet setup for skis. $1000, auto tune, wiring harness and 3.5” display with data logging....
  9. Replies
    12
    Views
    589

    Those I take valves look rough.

    Those I take valves look rough.
  10. Replies
    4
    Views
    210

    A bit of oil in the air box is normal. It could...

    A bit of oil in the air box is normal. It could be unrelated issues all together. You said you had oil on the plug only in cylinder 1. Was the valve cover to spark plug bore hole gasket leaking? Was...
  11. Replies
    4
    Views
    169

    you can leave the exhaust off. Just want to crank...

    you can leave the exhaust off. Just want to crank it over and get it to fire. You won’t need to run it for any length of time. Also, remember to spray fogging oil in the supercharger after every...
  12. Replies
    4
    Views
    210

    Was it smoking when it last ran or did you just...

    Was it smoking when it last ran or did you just notice a performance loss?
  13. Replies
    11
    Views
    685

    Not sure how your engine mount would have...

    Not sure how your engine mount would have anything to do with your supercharger belt but always replace the mounts. They are far to critical and can sink a ski quick if they let loose. The oem mounts...
  14. Replies
    4
    Views
    169

    I would recommend trying to fire it up for just a...

    I would recommend trying to fire it up for just a second and see if it will start. Don't run it for any length of time but see if it will start. Also check crank shaft play with a dial indicator and...
  15. Replies
    104
    Views
    5,224

    Yeah I’m planning on plugging the ends of the...

    Yeah I’m planning on plugging the ends of the bars on my ski also. I’m just using an expanding rubber plug that compresses. Similar to a boat drain plug. Here is the link for the seller I got the...
  16. Replies
    104
    Views
    5,224

    Picked up a new pair off of eBay for $35. I know...

    Picked up a new pair off of eBay for $35. I know Jerry was saying it was one of his favorite new features when the 2016’s came out. They really do make a world of difference with long term rides. The...
  17. Replies
    104
    Views
    5,224

    http://greenhulk.net/forums/attachment.php?attachm...

    http://greenhulk.net/forums/attachment.php?attachmentid=468053&stc=1Seadoo grips are now installed. I had to use a 16mm socket to “burn” out the stock seadoo bolt mounts. I glued these on to my Riva...
  18. Replies
    46
    Views
    2,378

    If john hadn’t seen the rotors yet while...

    If john hadn’t seen the rotors yet while disassembled, send him another picture with closeups. He probably thinks it sucked up something into the rotors and damaged them and while that not impossible...
  19. Replies
    104
    Views
    5,224

    Finished building the harness and it has...

    Finished building the harness and it has completely cured my hot start issue. I made the harness completely plug and play which was super convenient. No switches of buttons and is fully automatic....
  20. Replies
    46
    Views
    2,378

    Hmm that’s odd. Well he would know. Do you want a...

    Hmm that’s odd. Well he would know. Do you want a new one? If you want a stock replacement you can get one on our forum store. Otherwise I may be inclined to just grab a stage 3 from Steve at kawi...
  21. Replies
    46
    Views
    2,378

    If you’re going with a 1:1 pulley then yes you’ll...

    If you’re going with a 1:1 pulley then yes you’ll need to upgrade the injectors.
  22. Replies
    4
    Views
    144

    It’s most likely one of the items moond0gy...

    It’s most likely one of the items moond0gy mentioned. Also a good reminder for every ski owner to put a bilge pump in. It won’t fix a hull breach or massive water leak but will give you valuable time...
  23. Replies
    46
    Views
    2,378

    The 300/310 charger doesn’t fit. I was looking...

    The 300/310 charger doesn’t fit. I was looking into that also but it’s just not easily adaptable (not absolutely impossible but there are so many components to swap over and a lot of custom bracketry...
  24. Replies
    104
    Views
    5,224

    Thanks! Was going to go with the bracket for the...

    Thanks! Was going to go with the bracket for the old air box as you suggested but had to use some of the 5/16 fuel line for my Jeep and didn’t have a long amount remnant to get it all the way back...
  25. Replies
    104
    Views
    5,224

    Fuel system complete. Also added the Riva bars...

    Fuel system complete. Also added the Riva bars and the 2* pump wedge (installed for down trim to reduce porpousing). FP set to around 3 bar. Installed the one way check valve and the deatshwerks pump...
Results 1 to 25 of 200
Page 1 of 8 1 2 3 4