Search

2 strokes are super easy to work on, if you have a basic tool kit and a decent machine shop you can keep them forever.

Get your self a shop manual, I can send you the pdf if you want, some YouTube...

Sadly there is no value for the ski now,
But in the future maybe and not just the near one.
If all people junked thier steam cars, we
Wouldn't have left to see and admire.
It's still can be...

So am rebuilding a 1200 pv engine.
And these are the bearing sizes which you can purchase
Online or locally without paying alot.
Looking for the parts using yamaha numbers will be harder or more...

BTW some of them also can make or repair cables (throttle, steering, etc) , and much cheaper and faster than ordering one online.
I basically use them for everything from car ac piping to brakes,...

I suggest a local hydraulic machines supplier
They usually carry a good variety of sizes and types.
And if you take a sample, they can provide a similar or better material.
At least this is what...

To be honest, idk and I don't care.
I parted the thing as soon as I got it.
I have heard so many stories. So I premix everything
One less thing to worry about.

I just purchased a "waverunner" for next to nothing because of a seized engine caused by a bad pump
Go premix just my two cents.
I will you send you one for free if you pay for the shipping

Build by me x) 468189

Thanks for your opinions, so basically evinrude is the Ducati of the outboard world.
Am also not a big fan of alien tech, I prefer things that get the job done. And I need a motor to get me from...

Hi, am looking for unbiased review so I think I can get one here,
So there is a 14ft bayliner with a 2007 90 hp etec.
I really like the boat, style, and can tow it with my existing vechile.
But...

Other than the cooler, my lx has zero storage.
Any ideas where I can keep some stuff.
I don't need a full rack, just enough dry space for a phone
Car keys, portable anchor, wallet .
I already...

Since you tested the cdi and stator, might be the coil or leads.

I don't think it's normal, but I have a stock 66v engine sitting if you want I can take pictures.

Might been a bad patch of reeds that passed the qc

Unless you do a proper rebuild you are wasting your time.
A sbn or at least a carb rebuild kit is required.
If you just keep playing around. At some point you will get bored.
Your engine have...

Problem solved, remove the 2 bolts from the intake. And replace with 2 new long bolts.
466424

I want to upgrade my carb to sbn44,
I bought the carb but I think it uses 2 bolts to the intake manifold while my bn uses 2x12mm nut,
Any ideas or adapter kit available?

The seller send me a...

How about we make a thread we're we can share manuals, they are over 20 years, I don't think yamaha will care

and since the weather is still good for the gelcoat to dry easily . why don't you freshen up the hull(s) , new gel coat below water line and some polish and new stickers , leather ,etc .

Just rebuild , and make sure your rebuild kit have the correct spring . too high wont start .too low will flood .
there is a million youtube video of how to .but my advice is not to count the...

https://www.shopsbt.com/guides.htm

Sbt have a free engine removal manual. Very good.

And to make things clear, when am saying it's a good ski for your kids, am also talking about the ownership aspect.
For you as a first timer, breaking the hull or screwing the. Engine on a 500 usd...

I think if you are planing to use the ski, you should at least rebuild the enginen area as I mentioned earlier.
Selling a one of the 3 ski is not a good idea, a starter can set you off the same...

x2, spark is easy to check, remove spark plug and test it near the engine. Away from the spark plug hole.
If it's arc from the spark plug to the engine it's OK.
Engine compartment should be clear...

I have a 650lx and a xl1200 Ltd, and I still enjoy my 650 alot.
It's not for everyone, and it's almost like a early superjet with a seat, but it can be your gateway to this hobby both mechanically...