Search

Type: Posts; User: Diegosan

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. that is correct, the 2012 - 2018 FX hull had no...

    that is correct, the 2012 - 2018 FX hull had no bow spray issue.

    The FXHO oil cooler changed in 2012 and it hasn't changed since the difference between the 2017 onward SVHO oil cooler and the HO...
  2. What I am saying is that it is possible that the...

    What I am saying is that it is possible that the ecu has a fault and is activating the reverse rpm limit due to an internal fault. As I said I have seen this happen once on an sho where it was the...
  3. the ecu limits the rpm not the switch.

    the ecu limits the rpm not the switch.
  4. I missed the FZ part. in that case you can...

    I missed the FZ part. in that case you can monitor on YDIS if the reverse switch is on or off it may not follow the action from the switch when the fault happens.

    in particular reverse is the...
  5. Check if no wake mode will work, if it is stuck...

    Check if no wake mode will work, if it is stuck in reverse no wake mode will not work, it could be a fault with the ecu I have seen this once on a 14 fx sho.
  6. Replies
    6
    Views
    263

    You can never have too many GPR's looks good in...

    You can never have too many GPR's looks good in black too. is that a modified stock plate? better in the rough?
  7. sounds like a broken timing chain, take the...

    sounds like a broken timing chain, take the rocker cover off and you will know. if not you need to check compression but check the chain first.
  8. Replies
    7
    Views
    600

    WTB - Parts bump

    bump
  9. Replies
    22
    Views
    1,737

    I haven't been over 73mph with a stock plate but...

    I haven't been over 73mph with a stock plate but if the ski is running flat with the bow dragging then it is likely to be in predictable at high speeds.
    the biggest thing I noticed with the stock...
  10. Replies
    22
    Views
    1,737

    putting shims on the rear bolts will force the...

    putting shims on the rear bolts will force the bow down and tame the porpoising but surely doing this will lose speed as well ?

    I have seen an all round gain in fitting a stock 2018 fx plate. more...
  11. Replies
    17
    Views
    760

    Check all the hose clamps on the exhaust system,...

    Check all the hose clamps on the exhaust system, they can break and under power the exhaust gas can leak into the engine compartment. this will block up the air filter too eventually if it happens.
  12. Replies
    5
    Views
    322

    looks like Sato Engineering AKA Speedmagic. A...

    looks like Sato Engineering AKA Speedmagic.
    A Japanese company.

    Their logo has the SE usually.



    https://speedmagic.co.jp/
  13. Replies
    4
    Views
    293

    I would find another engine possibly from someone...

    I would find another engine possibly from someone doing a gprsho or gprxp conversion or just sell it and buy something running already.

    Or you could do a conversion yourself.

    Ultimately the...
  14. I have noticed the same thing before in trying...

    I have noticed the same thing before in trying those nozzles for top speed.
    However thinking now with what Tommy said about increased thrust,veins, and vein size would it not make sense to change...
  15. So does that mean your venturi nozzle is at 7...

    So does that mean your venturi nozzle is at 7 degrees now?
  16. Great question, would imagine cams and porting...

    Great question, would imagine cams and porting would wake it up nicely would love to know if anyone has done it also
  17. Replies
    16
    Views
    1,327

    Thanks, good to know where to start from. I was...

    Thanks, good to know where to start from. I was running 87mm. Everyone said "you will kill yourself" if you go smaller. i will experiment with that too, every setup is different and I haven't had any...
  18. Replies
    7
    Views
    368

    Sounds like a good plan they are a fun ski to...

    Sounds like a good plan they are a fun ski to ride. Post some pics once it's all done.
  19. Replies
    16
    Views
    1,327

    Yeah not cheap but it happens, I intend on...

    Yeah not cheap but it happens, I intend on running the stock wheel and bringing the revs up. I have different pumps and impellers so I will be able to see what works best when the time comes. It is...
  20. Replies
    7
    Views
    368

    You dont know what you've got till you try it,...

    You dont know what you've got till you try it, you may find you're happy with the setup you have. The steering nozzle is the nozzle at the very rear of the ski which turns with the handle bars and...
  21. Replies
    16
    Views
    1,327

    No, timing chain broke. I have built a new motor...

    No, timing chain broke. I have built a new motor with the big chain, im going for 95mph this time. Hope to rev around 9200 and sourced a faster plate, will make a big intercooler setup and change the...
  22. Replies
    7
    Views
    368

    You need to ride it and decide what you want from...

    You need to ride it and decide what you want from it, all round performance, top speed, cc racing ? Each combination of parts will best suit a different purpose, the plate you have is better for top...
  23. Great top speed!, what affect did the small...

    Great top speed!, what affect did the small nozzle have on holeshot?
  24. Replies
    4
    Views
    537

    The svho has the same bearings as the vxr, the...

    The svho has the same bearings as the vxr, the svho has an extra seal compared to the vxr so 3 in the svho instead or 2 in the vxr. The seal area of the shaft is longer. I think the threaded area is...
  25. Also check for an exhaust leak at all of the...

    Also check for an exhaust leak at all of the clamps in the exhaust system. The more hidden ones can break if used in salt water or on the odd occasion I have seen the hoses not installed correctly...
Results 1 to 25 of 66
Page 1 of 3 1 2 3