Search

Damn what springs you running to safely rev passed 2000k RPM? :D

Someone on facebook group posted that both of his skis sank at the same time due to carbon seal failure. Turns out he had impellers changed and later ran them on the hose for "a few minutes" in...

You're overthinking this, there's literally a rubber boot holding everything together from blowing apart where the carbon seal is. Adding a 1mm nozzle through the plastic piece onto which the rubber...

I already have a setup where I can run on the house indefinitely, even cooling the ride plate from below which gets super hot after few minutes.

I don't see why they wouldn't be able to put a...

BRP should come up with a way to cool the seal while on the hose. How about some valve that can be flipped to redirect some water to the seal while on the hose. Not exactly rocket science but would...

Yamaha does their new model unveil in August, would you really want to take delivery of a 2021 model when 2022 are getting announced? It might be ok if you live in Florida or some other place where...

Looking good.

Sad that gelcoat days are over, restore project like that won't be possible with the acrylic coatings.

I couldn't care less about metallic finish sparkles, give me gelcoat any day...

How did you get to the screen to updated the ip? I tried going to /LambdaExplorer.html on mine and that endpoint does not exist 404.


Still can't believe they hard coded an IP address into a...

I really like my HT Premier, in a wet suite I'm like glued to the seat and in shorts there's no discomfort or rubbing of any kind. Bonus it looks awesome.

But damn are they a pain to put on on...

I believe that's the opening in the wear ring for the pinning/retaining screw.

3M Super Duty Rubbing Compound

It contains sand like particles that wear out as you're buffing so it starts coarse and gets finer as the particles wear down.

I'm using just a cheap variable...

When you say "within specification" are you referring to clearances the CP says to use? Just double checking you're doing clearances based on the new pistons.

To me it would be insane to do this...

Carbon seals have been around for 20+ years, they wouldn't be still here if what you're describing was even remotely a normal thing. There was a batch of bad seals couple years ago, maybe it's...

You need a different shop to correct whatever is causing carbon seal to be failing. That's not normal, you can do 400 hours on a single seal if everything is aligned correctly.

There was a bad batch of carbon seals around that time frame, you probably had a lot of black dust in the hull.

:shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::sho...

Is that a Spark trailer? It looks too small for a ski that large.

Here is the video, not sure exactly at what time point he says it but for sure its there somewhere :)

https://www.facebook.com/watch/live/?v=369706024186702

I could have sworn I heard the Sea-Doo ambassador guy, well former, mention the updated manifold added horsepower when he was talking about the new RXP in one of the videos.

He was talking about...

I used to be all into wet sanding until last year when I tried hex logic buffing pads and 3M heavy compound. The course pads will eat through gelcoat with ease, makes resorting large surfaces so much...

You're seeing a very narrow view of things, people don't post bad videos.

There are no magic tunes that add power where another tune(er) couldn't do, you basically have air fuel ratio and...

How is the visibility in the sun on the dual lcd cluster?

No, it looks like that piston smacked the head leaving those indentations.

Looper!

I've been running Sierra 18-3555 for years.