Search

http://greenhulk.net/forums/showthread.php?t=290258&p=3104803&viewfull=1#post3104803

With PayPal I recommend you use the invoice and payment for goods methods.
Yes, there will be fees. Those...

I began my journey with Greenhulk in the Polaris forum years ago. Learned a lot along the way, and enjoy sharing with others.

A decade ago I noticed how the post count had accumulated and...

With the seat off, start the engine on land and hold your hand on various plastic and rubber exhaust parts. Move them around, listen for the sound to change.

You may find that something is...

This is a watercraft forum. Useful information complied, linked and presented in a usable manner, has value to the reader.

That other thread does not.

From a safety perspective seven years maximum, and depending on the climate and storage conditions, could be a lot less.

DOT date code on the sidewall gives the age since manufacture.

Sitting...

http://greenhulk.net/forums/attachment.php?attachmentid=473072&stc=1

Felt like a long PWC winter since last September.

Riding season is arriving here. See you on the water!

Do NOT delete or in any way alter the factory oil injection on a Ficht engine!

The oil injection is mandatory. That is the only source of lubrication for the entire lower portion of the engine....

Well, that looks like 000 with some upper LCD display segments faded. You can read up on repairing faded oval MFD displays.
http://polarispwcknowledge.shorturl.com/first-things-to-do

When you...

Well then :-k

Might be cost effective to abandon this driveshaft, just assume the threads are damaged already.

Otherwise you might end up paying to have the old impeller extracted and then...

So you could turn it in the anti-clockwise direction and it would easily go about five turns towards ‘installed’, correct?

Sometimes the threads can become galled on the impeller, the driveshaft,...

Inexpensive test, shim the rear mounting bolt locations for the ride plate down with one flat spacer washer on each side at the rear.

Remove rear ride plate bolts, loosen the front bolts.
Slide...

The transom plate sealant is a known problem area. Even a tiny, tiny gap in the sealing can ventilate the jet pump. Compressed air is unlikely to reveal the hole.

You are half-way to having the...

I ride GP1800 SVHO with Worx extended ride plate. Worx ride plate is maybe 5cm longer than stock. Channel cut on underside, similar to your ride plate.

It does help with rough water, reduces bow...

Post a photo of the error message on the dash?

PPU error is not familiar to me.

Is the ignition system on this engine factory original or has the Gen III ignition update kit been installed?
...

Tis April first, about which Kevin cannot resist :facepalm:

Unless there is water/condensation inside the oil tank, the oil itself should be just fine.

Of more concern would be old gasoline in the fuel tank and fuel hoses. And possible...

Fob only needs to be near the Waverunner when locking, unlocking or changing Learner mode.

On rare occasions the security system seems to self-lock or engage learner mode without the Fob being...

That can change.

If we had instead collectively experienced 100+ years of electric power train evolution and market dominance what would we think of recently introduced internal combustion...

Offshore riding - the primary objective must be reliability of the running watercraft.

Every thing that you add to a watercraft can potentially reduce reliability. Even a simple manually operated...

Your observations and approach are well grounded.

You got caught in a situation with multiple contributing factors. Weather/wind/temperature, time of day, absence of nearby boat traffic that...

That twenty six year old trailer looks like it was built for much shorter and smaller PWC hulls.

To get the back end of the hull onto the actual bunks it looks like the hull would have to move...

There are other methods of clearing the intake grate.

Carry a rope long enough to reach under the hull and up to your hands on both sides. Rope must be tough enough to handle some tension.
...

Well, I can help you find the wires.

But I have misgivings about remote sudden engine stop shut down.
And potential reliability impacts from modifying the factory wiring.

PWC steer using...

If it was my hull I would be wanting to have it done sooner rather than later. NanoXcel core material is not supposed to absorb water, but I would be preferring to at least seal the deeper grooves...

The OEM throttle body mount for SVHO prior to 2018, aka the rubber dampener, was already known to be a potential failure item by the time I purchased my GP1800 SVHO in early 2017. Looking at the...