Search

I honestly believe the results are different on the 300 motor, no I dont have any data to back it up as my season is coming to an end.....I will have to check this out next season but I did retard...

Also keep in mind that once you stretch the bolts initially you have changed their integrity, if you reuse them and stretch them again they essentially will become weaker and not have the same...

According to my 2006 service manual there is a service limit measurement that suggests the head bolts can be reused if they fall within spec. That being said on the oem level these fasteners are...

464131
18 ounces lighter than the stock one

My 08 RXTX had an 87mm nozzle, I believe the PX had it too.

This is very relevant, you guys need to check your block and see what year it is. Without that hole you will have nothing but problems and there is no fix except to take the motor completely apart...

I'm running a Rude 3 @8180 with 48's and it runs 77-78 gps all day long on a 08TX….It pulls like a freight train and I have stock exhaust so it's real quiet. All the new 300 boys don't understand...

Get a set of reverse torx sockets, E torx. that will pretty much take the whole motor apart aside from a couple of allen's

I love this...."A real mechanic could do the job in the ski with the right tools"..... A real mechanic would pull the motor out, take it apart and do it right making sure to get all the metal...

I have to say this, the venting problem encountered here is really not an issue at all what so ever. Once addressed it makes the 04-05 blocks perform just as well as the 06+ ......However the key...

I'll take the sandwich please :D

Group ride this coming Sunday Aug 9th in Morris on the ILL river! Be There!!!!!!!!! �� 10am

Crankcase bolts are reusable

So how much?

So you're saying Clinton is not only an adulterer, he's also a homosexual fudge packer? fagmo :roll: :lol:[/QUOTE]

Like it or not the country was in way better shape when he was in office!! I...

To remove the driveshaft PROPERLY you need to pull the C clip BEFORE you remove the pump OR if you use the special tool they have to block the shaft from moving back while you use the proper tool to...

I know you ain't talkin bout me tackleberry!!! :evil: SURE go ahead, beat a man while he's down :beatdeadhorse5: Very funny :toetap05:


Are you.........MAD? :smt028

Did you get the right shaft for your ski? If you didn't move the motor then the shaft will go right back in if.you got the right one...