Search

Type: Posts; User: KEYZBUM

Page 1 of 8 1 2 3 4

Search: Search took 0.02 seconds.

  1. The only way for you to get that much water in...

    The only way for you to get that much water in the waterbox would be run hose and NOT run ski..

    The shape of the waterbox and the height of the outlet pipe (being lower than the waterbox inlet ie:...
  2. Who has had Yamaha Damage from frozen water??

    Looking for 1st hand stories about damage to Yamaha's from frozen water..

    As the temp drops and the winterization post start-up, I would like to find some info/instances of people even seeing...
  3. remove pump.. remove coupler cover.. then with...

    remove pump..
    remove coupler cover..
    then with Big pliers on the coupler try and rotate motor

    Bought a ski last month with "locked motor" and put a new impeller liner in it and sold it in 2...
  4. https://web.archive.org/web/20191129085219/https:/...

    https://web.archive.org/web/20191129085219/https://maptuner.se/download/Download.aspx?Fid=1&file=MyMaptuner_2.5.91_Combined3264bit_Setup.exe


    This is a 32 and 64 bit installer.
    2.5.91 version,,...
  5. Replies
    1
    Views
    143

    From what I remember they will work fine. if not...

    From what I remember they will work fine.
    if not this guy ships to south africa
    https://www.ebay.com/itm/224120542703?hash=item342ea015ef:g:HxAAAOSwp6ZfObGL#shpCntId
  6. Replies
    36
    Views
    3,076

    pull coils off plugs, leave plugs in, use another...

    pull coils off plugs, leave plugs in, use another set of plugs placed in the end of coils , let them sit on the head.
    crank ski over and see if plugs are sparking...
  7. I use small jumper cables to test. From Ground on...

    I use small jumper cables to test. From Ground on battery to engine block.
    Always undo and re tighten battery cables , if you can move cable to the right and it becomes loose It wasn't tight enough...
  8. Right hand side of motor , reach under the the...

    Right hand side of motor , reach under the the throttle body.
    It is just "stuck" on with the rubber around the solenoid onto 2 tabs on the airbox..

    Pry down and up and it will pop off the tabs.....
  9. Replies
    23
    Views
    1,048

    Got some pics of the cover and grab handle that...

    Got some pics of the cover and grab handle that needs to come off for plug swap????


    11 is for the preset gap size
  10. Replies
    3
    Views
    379

    Over filled oil will put oil in the air filter...

    Over filled oil will put oil in the air filter box in front and then put oil in each cyl..
    Set oil level correct , check if air filter is oil soaked, clean out air filter box.
    Then run it out on...
  11. Replies
    1
    Views
    290

    oil pump is on the side of motor,, low on the...

    oil pump is on the side of motor,, low on the block under carbs.
  12. No that cable is bad, The sleeve he is moving...

    No that cable is bad,
    The sleeve he is moving should be crimped in place near the transom..
    Dealer totally broke that, they will break on their own but only after many years of salt..
    With the...
  13. Replies
    16
    Views
    6,756

    On old style pumps = No On the new style (1...

    On old style pumps = No
    On the new style (1 Piece) pumps= Yes
    The new drop in liner has plastic on the back side of liner to fight the corrosion .
  14. Replies
    16
    Views
    6,756

    I dont know what year and model got the new pump...

    I dont know what year and model got the new pump with plastic backed replaceable liner..
  15. Novel Time Again... Ok I have been dealing...

    Novel Time Again...

    Ok I have been dealing with 1 of these for a few months..
    09 Vx Deluxe 124 code - no movement from throttle body.
    Swap in another T/B - still nothing- same code
    Swap ecu-...
  16. Replies
    13
    Views
    752

    Im not saying that its binding the impeller,, but...

    Im not saying that its binding the impeller,, but if it has a bottle cap or twig/stick etc between the impeller and liner it will still run but no thrust after idle,.
    I had a peice make its way...
  17. Replies
    13
    Views
    752

    you need to get an eye on the front of the...

    you need to get an eye on the front of the impeller .
    on the trailer you can lay under it and use a flashlight to look at the leading edge , I bet it has a twig/stick wedged between the impeller and...
  18. 1 Bad plug = 10 mph on Ho ,more on a Svho

    1 Bad plug = 10 mph on Ho ,more on a Svho
  19. Replies
    9
    Views
    916

    The only diff part from vx to ex is the exh...

    The only diff part from vx to ex is the exh manifold , kinda remember them swapping them around for better hp numbers in racing..
    I personally think there is diff tunes for the whole vx line with...
  20. Replies
    1
    Views
    259

    No Yami has a plastic liner.Stock.(Let Me Know If...

    No Yami has a plastic liner.Stock.(Let Me Know If Wrong)
    The new 1 piece pump have plastic on the backside of the replaceable liner to reduce the dissimilar metal corrosion/oxidation/salt build up...
  21. They queted him 17k for new motor(yami) over 9k...

    They queted him 17k for new motor(yami)
    over 9k to rebuild his motor.
    and 5-6k for an sbt motor.
    found out they sold him every piece of the exh for $2100+,, almost the same price of the sbt motor...
  22. Replies
    3
    Views
    381

    https://www.yamaha-motor-yes.com/search Plug in...

    https://www.yamaha-motor-yes.com/search
    Plug in you vin as it is on back plate.... US-YAMA0000X000
  23. Replies
    16
    Views
    6,756

    No stock is aluminum with a SS liner pressed...

    No stock is aluminum with a SS liner pressed in.Hence the corrosion build up between the 2 layers
    Plastic is an aftermarket "fix" for the swelling liner ..Not a fan of these.
  24. Replies
    16
    Views
    6,756

    Living in super south florida , the second most...

    Living in super south florida , the second most common part I replace (for joe public) after spark plugs (not counting the 3 rental jet pumps each week) is the impeller liner..(cant keep em in...
  25. Ok update time for my guy who had 1 bad motor in...

    Ok update time for my guy who had 1 bad motor in his 2007 AR230 Yami JetBoat.
    They sold him a Sbt motor for $2900 and charged $6500 to install.
    Over 9 Grand for a installed Sbt motor -Holy Shit.....
Results 1 to 25 of 200
Page 1 of 8 1 2 3 4