Search

I have a rebuilt 1951 Kellogg American 331TV 5hp 80 gallon industrial compressor. I use IR air tools, some of which are old rebuilt hand-me-downs from my father (ex-GM mechanic). I feel there's a...

The slot that goes through two sets of sealing surfaces. Zooming it makes it easier to see.

Dammit!!! I’m no longer on the page. Would it be possible for somebody to copy the verbiage and post it here?

I’m not familiar with the groove in question. I am wondering if we should do this to...

I looked for this article and can’t find it. I called Group K and left a message with no response.

Call Newmiller machine and have a talk. He will ask you what type of riding you do, what fuel is available and what altitude you’re at. Then make an educated suggestion for your ski.

Where is this oil passage located?

I’m not all too familiar with your machine, but for peace of mind... I’d rewinterize them.

that's sexy!!!

Should I completely fill the passages from end to end, or just fill the middle of the channel?

Any photos on how you did it?

I’ve searched and searched for this mod with negative results. I was going to use 2 party epoxy (six ten by West Systems) to fill the crossovers.

Damn... I had no idea. I’ve read so much about him and his mods.

Fercho hasn’t posted since 2013... but I’m sure somebody here will chime in to help you.

There’s a sticky for the pop off pressure chart

Good point.... my buddy mounts his stand-ups sideways.

The other option would be to install bunks perpendicular of the tongue, then load the PWC from the side. This way the trailer tongue doesn't have to be a mile long.

Take the time to go through the entire thread....
There's mention of all jetting settings

Try here:

http://greenhulk.net/forums/showthread.php?t=70129

You have the ever so popular mid range seizure. This is due to the lean stock carb settings. Go to the 2 stroke section and look at Oside Bills recipe or “Carb settings I have used”

Lots of...

BADASS

Retro??
We love or GP1200R!!!

Did you make this hood??

Pretty cool. Post photos of it installed.

Exactly... available from NAPA

http://greenhulk.net/forums/attachment.php?attachmentid=469212&stc=1

Not VF3's, but Carbon tech....
https://rivaracing.com/i-17284798-carbon-tech-yamaha-1200-pv-high-tension-reeds-66v.html