Search

Type: Posts; User: K447

Search: Search took 0.11 seconds.

  1. Sticky: See my signature links for the Polaris Industries...

    See my signature links for the Polaris Industries web sites, plus lots of other useful info and links.

    I think the MSX 140 Owners manual is available to download, once you have created an...
  2. Sticky: Is there a low spot in the stock water hose...

    Is there a low spot in the stock water hose routing that would not drain when the bow is tilted upwards?
  3. Sticky: The standard winterization process for all...

    The standard winterization process for all Polaris Ficht engines is to raise the front of the watercraft 20 degrees or more, which allows the water to fully drain out of the cooling system. Normally...
  4. Sticky: http://www.youtube.com/watch?v=W8K_4WKKneU&feature...

    http://www.youtube.com/watch?v=W8K_4WKKneU&feature=share&list=UUZegpDuR1J1U0dX2N6-h_vg

    The engine was fully warmed up. At idle the water pressure and flow through the EMM is quite modest as the...
  5. Sticky: 311635 I used an oscillating blade Dremel tool...

    311635
    I used an oscillating blade Dremel tool to trim the black foam away.

    Another option would be to use a Weller hot wire soldering gun to cut the foam.

    311637

    311639

    Note that this...
  6. Sticky: How to install an external water exit pisser for the MSX 140 Ficht EMM

    I have installed a hull water exit for the EMM flow on my MSX 140.

    Here is the pisser installed on the right side of the MSX 140.
    311243

    311244

    From the inside, before I drilled the...
Results 1 to 6 of 6