Search

Any moron that wears a mask at this point should just do us all a favor and go all the way by tying a plastic bag tightly over their head.

I do but there mostly early stages, i have a few videos but doesn't seem to allow me to post them :facepalm:. here some pics i have on my phone during the process. don't criticize my welds too much,...

9.2 volts measured on a resting battery is nowhere near enough voltage.

A fully discharged battery is over 11 volts.

At 9.2 volts the battery is beyond fully discharged and likely internally...

If u hold a dog underwater to kill the fleas too long sure ull kill the fleas and the dog too

Yea cj been at WFH over a month now and it’s nice but i see a lot of people suffering from job loss...

Fizzle. Without question.

I have a trailer and can drive to locations much farther south 8-)

Wet suit and touring jacket can turn 'cold days' into riding days.

Playing hooky from 'real winter' ...

Step 1. Get the stock tune put back in.
Step 2. return for warranty!

On forums, FB groups, meets, etc., I am always hearing a wealth of misinformation about ceramic coatings, so I figured why not start a post that folks can read about what to expect (and not expect)...

http://greenhulk.net/forums/attachment.php?attachmentid=447914&stc=1

Quick update: First time on the water today and no leaks! I even did some donuts where I buried the nose of the ski in the water intentionally just to check. I also accidentally bumped the right...

Turned out pretty good, and I know this is too late for advice, but for those that try these sorts of repairs, let me help you with a tip. (I have years of body work experience...)

You went...

I’m not concerned with the strength of that grate. For me it’s how much metal is in the jet pump intake opening. Seems like it would block a lot of water flow to the pump

This is where I put my Garmin transducer. This location works better than any location I have tried. Reads perfectly at 50 mph and doesn’t lose track when turning. Also very minimal if non...

Water pressure from the garden hose (perhaps surprisingly) does not seem to ‘open up’ the flush hose kink which occurs right at the X fitting (Y fitting on HO engines)

Others have reported engine...

This is where its mounted now. I did this on my gp 1800 too. Not only does it not affect the top speed or handling the readings are rock solid up to and above 50 mph
...

I would suggest putting the wallet and car keys in the rear seat storage bin. It is waterproof and floats.

You can carry the entire rear storage bin into a restaurant or back to your truck at the...

Nice solid fishing/cooler rack http://greenhulk.net/forums/attachment.php?attachmentid=445246&stc=1

Worx sells a trim lever extension that magnifies the trim range. I like the results on my GP1800 with Worx extended ride plate. Full trim up to full trim down has more a significant effect with the...

Inflate the trailer tires to slightly above the max pressure printed on the sidewall. They will slowly lose some pressure during storage, but max air pressure will minimize flat spotting.

A lot of...

Used oil is not the same as fresh oil. That is why it needs to be changed.

The engine is going to sit for the same amount of the either way. Fresh oil will still be good come springtime. Old oil...

You're right...the bolt action weighs...23+lbs....still almost 3x the weight of my Marlin.

I have posted in other threads multiple times regarding tongue weight and correct hull positioning on the trailer.

The bunk position under the hull has several important factors.

The length of...

Ha Ha,

No, you're not quite reading it exactly right. It was 36hrs:28min Moving Time as you see in the pic. 59 Hrs was the total time for the GPS logging for the 11 days. I might have had a...

In my opinion the Yamaha 66 engine in the GPR was the worst ever made of any brand.
Ever...

https://youtu.be/XoQFQN1Grjk