Search

Looking for a good carb 951 crank and balance shaft.
Let me know what you have.
Thanks

I have 4 skis about ready to go. We are definitely going to Lake Cushman. Im down in Shelton 20 min north of Oly.

So I have made a air intake for the ski and wanted to know how should I setup a catch can to help with Gas in the oil issue. Any suggestions?

Looking for riva exhaust for my 2007 250x ultra or something similar.
Let me know what you have.
Thanks

Yes I did, I also upgraded the bearings to Timken.

Little paint on the goodies.

Hi all, I have been so busy at my shop Iv had no time for my 250x Ski project. I did put in 4 hrs today on it and have my rebuilt SC installed with exhaust manifold and down pipe ( What a frigging...

Not sure if the 250/260 ultras are the same as the 310x but
This is the gates belt# off the shelf at any parts store. I think Gates makes a really good belt.
468551

I'm in 100% these seem very simple in a all around build. I've been building turbochargers for the last 18 years . Definitely going to fix and sale to regain my$
By the way, were do you put the...

I'll definitely do that for sure and get the kit from him. Not sure with my supercharger is worth now but it's definitely in good shape. The bearings were fine everything else was great. No scoring...

Got it apart and the rotors looked great but the coating is flaking off. I just bought a in perfect condition sc. I will put new bearings in it regardless. Paid 980$ with shipping.
Seems like a...

Ok makes sense, I'll get it apart and send pictures.

The sc spins with a slight hang up from the coating build up in one spot. I will take it apart and check the rotors.
Were can they be recoated if they are good? Here is what jon sent me from the...

I agree, might be a while before I can spend 3grand+ on one. But might get lucky and find a good one to rebuild.

Looking for a good used supercharger for my 2007 250x. Let me know what you have!
Thanks.

I meant to put this in wanted to buy!!!

Might be a waste of time, but if so I will need to find me a good SC and rebuild it. Or maybe upgrade to the eaton 300 sc. and fab that one up.

I would have to make brackets to fit the supercharger. from my research the only concern is volume per revolution.
the TX20 is 2 liters per rev and the M62 is 1.016 liters per rev. I am looking at...

I will do that! I did find a SC thats the same size and can be rebuilt over and over. I will post pictures when I have the unit in hand in the next few days.

Yeah I'm not sure but that's what Jon emailed me. I will check with steve.
Im going to pull it apart tonight and see whats going on inside besides the coating failure.

Ok cool, so Jones bon said the sc was not rebuildable because the coating was damaged. He said the rotors were damaged because of it. So now I need to find one!

Maybe some injectors.?

Thanks again for all the support and information. I've been doing a lot of reading and research. I'm wondering is anybody successfully ran a different supercharger setup on one of these skis? Not...

That's a dam good price, I left him a message. And I agree with the intercooler I'd rather tear it all down and send it through my hot pressure washer.
I found the seals for the IC. Were do you get...

Yeah pretty much a bummer but what are you going to do. Bought the ski cheap enough and I'm willing to invest in it. How much did John Bond charge or do you guys have contact information so I can...

So I yarded the IC and found chunks in the bottom of the cooler. So I pulled the SC and found it flaking off the rotors. Sh*t
This would cause a power loss right? Crazy the thing only has 57hrs on...