Search

Type: Posts; User: Syuhas85

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Replies
    3
    Views
    438

    because a dashpac cost 500.00....*shrug*

    because a dashpac cost 500.00....*shrug*
  2. Replies
    4
    Views
    586

    Don't know if the seat rear seat grab is the same...

    Don't know if the seat rear seat grab is the same as the px but drill 2 x 3" holes throw some FrogZSkin over it cheap & Easy
    http://greenhulk.net/forums/attachment.php?attachmentid=463230&stc=1
  3. Replies
    3
    Views
    438

    Boost gauge line T off RRFPR?

    Anyone know if it will cause an issue if I T off my fuel pressure Regulator for my boost gauge? Will it screw with the RRFPR at all?
  4. I swapped out my wheel for a 137+4 on my 260 and...

    I swapped out my wheel for a 137+4 on my 260 and installed the following:

    RRFPR (Im running rising rate at stock 58lbs, you can also use static just bump up fuel pressure watching your afr)
    ...
  5. Thanks Mario, I sent the ECU out for Flash,...

    Thanks Mario,
    I sent the ECU out for Flash, Thats being done I Left the RRFPR as Rising Rate @ 60lbs (don't know if that needs to be bumped down or not but will work on that later)... I have an...
  6. RXPX 260 - Can you fit Short tip Injectors instead of long tip? EV14 62lb

    Have a Fresh set of EV14 650's (62lb) injectors with wiring adapters that will bolt directly to my ski, the difference is Short tipped vs OEM Long Tipped (sprays more in to one Valve) will this harm...
  7. Do I need A Tune with 137mm+4 SC Wheel?????? RXPX 260

    Long Story short my Supercharger Blew on my 2012 Rxpx 260 the wheel was destroyed!!!

    So I had it rebuilt with 137+4 Wheel, I also installed the Riva Rising rate fuel pressure regulator ( I DID...
  8. I just picked up a new Solas concord 15/21 will...

    I just picked up a new Solas concord 15/21 will see how it does.... I was gonna repitch it to 20 with only an scom, exhaust and intake figured it be to much but I already put the pump back together...
  9. So is stock 15/21 or 14/25 lol??? I'm trying to...

    So is stock 15/21 or 14/25 lol??? I'm trying to gain a little speed just don't know the right fit of impeller … it wont blow over the limiter I can just break gps limit not rpm limit.




    ...
  10. I seen those what would be a good pitch to go...

    I seen those what would be a good pitch to go with 15/19?
  11. Re-pitch stock or new impeller for rxpx 260?

    Pulled my pump off to re-grease and put a new wear ring in... thinking about either sending out the stock impeller and get it cleaned up and repitched or new impeller any ideas on what pitch to go...
  12. Replies
    9
    Views
    1,052

    View Post

    I was was thinking about running rear air, what’s the method to your madness you see posts about them on the 300 just not the 260... which I have a 260, my guess is just a 3” to 4” coupler with...
  13. Ok, thanks for the reply so when the due light...

    Ok, thanks for the reply so when the due light comes on its needs to go to
    the dealer to get reset.
  14. Rxpx 260 after maintance do I need to reset??

    I Did general maintenance my self oil change, filter, o-rings, spark plugs. Is there anything I need to reset so a maintenance lite doesn’t pop? She has exactly 60hrs now.. i bought it over the...
  15. thanks for the post I give it a try.

    thanks for the post I give it a try.
  16. thats actually cheap for all 3 bumpers... thanks!...

    thats actually cheap for all 3 bumpers... thanks! im gonna try the Ultimate black or the back to black see how it comes out if it looks like sh*t ill just swap them out....


    BTW..... That site...
  17. RXP-X Bumper Scratched & Dull any remedy to fix?

    2012 RXP-X plastic bumpers are Scratched & Dulled up... before we start yes I know don't hit things this is from prior owner.... Hulls clean bumpers not so much and they look like sh*t....

    Anyone...
  18. Replies
    21
    Views
    2,159

    I will check the wiring when i get home and...

    I will check the wiring when i get home and follow the black and white wires... They must of bypassed it and used the LR-505 for the Bilge. The bilge does work it turns on every 30secs or so checks...
  19. Replies
    21
    Views
    2,159

    Thanks for the info I will check the wiring as of...

    Thanks for the info I will check the wiring as of right now it Does *NOT* matter if the LR-505 is plugged in or Unplugged the ski will still Start with the Button and can only be shut off by pulling...
  20. Replies
    21
    Views
    2,159

    **UPDATE** Don't know if anyone noticed in the...

    **UPDATE** Don't know if anyone noticed in the pics but while I was reading on these forums I noticed there was a forum explaining the LR-505 (for Carbed engines) and LR-503 (For FICHT) Start/Stop...
  21. Ok, sounds like I'll just rip the motor out......

    Ok, sounds like I'll just rip the motor out... Any preference in between S.E.S or SBT?
  22. 99 XP LTD..... Crankcase has water/oil sludge how to remove?

    Hello, long story short I bought a Yami gp1300r with 52hrs and basically got the xp and a double trailer for free lady didn't know what happen to it and guess they rode it last year it shut off...
  23. Replies
    21
    Views
    2,159

    ok, once the new plugs show up I'll follow the...

    ok, once the new plugs show up I'll follow the procedure for the injection pump adjustment "Martin" sent me the service manual. Once I get those down and do a fuel pressure test will know more and...
  24. Replies
    21
    Views
    2,159

    The hose is no longer a hose someone before me...

    The hose is no longer a hose someone before me has cut it and used it as a bumper on the metal bracket...... The spark plugs I had to order no one carries the NGK PZFR6H locally so there on there...
  25. Replies
    21
    Views
    2,159

    alright will check that today canadain thanks!

    alright will check that today canadain thanks!
Results 1 to 25 of 31
Page 1 of 2 1 2