Search

and exactly how many high school students are being offered the opportunity to lean how to work on jet engines for summer internships? We're really short on techs and the pipelines are drying up...

change your sparkplugs, problem solved.

plugs are very prone to glazing if you rev the engine while the plugs are still cold.

this is a major problem on seadoo's especially.

there's a really good reason that there are no aftermarket waterboxes for the 15f

just get yourself some headphones and play some drag racing mp3's on a loop

btw, impressive riding skills trump...

yeah certain letter agency people keep saying there is no such thing as a coincidence.

isn't THAT a coincidence

one might ask how this pattern keeps appearing and some govt agency doesn't...

it's worth mention that this story is two years old.

but......

https://www.nadaguides.com/Boats/2007/Sea-Doo-BRP/WAKE-155/10242272/values

best of luck to you if in the end you opt to go ahead with this project, the number you stated is for a ski sold by a...

you don't want a loose washer floating around in the engine not telling where it will end up. So instead of getting to the bottom of the DESS key issue you've now screwed yourself into pulling the...

I found it odd that the engine was able to fire without proper key recognition but perhaps without proper key recognition only the injectors are shut down in any event it might turn out to be the ECU...

yeah a candoo can program keys no problem, if the tech know how to deal with balky skis

the starter does sound like it's not up for the job, or the battery wasn't providing enough power

next...

well so far, so good.

put some marvel mystery oil in the #3 and crank the engine a bit. cover the plug hole with a rag to keep it from making a mess

the ignition appears to be unlocked. but...

if you want to play it safe go with a chainfall secured to a manly crossbeam life the ski a few inches off, pull the trailer, install your shopcart

engine cranes can be used if your garage floor...

pardon me for jumping in here, but until the dess unlock sequence is working ( two beeps when the key is installed), none of this really matters much. for now the engine spinning is pretty good. to...

Why I carry EVERY SINGLE time I walk out my front door. While I've never seen a bear around, I've walked out into a pack of pigs eating what was left of my bird box a few years ago and of course the...

just makes things easier to deal with like getting the harness checked out and so on.

if you read the thread before jumping in you will see my assumption of a dropped valve was incorrect, the...

And.....?

Sweet!

Shop rag most certainly with that bs response

if they repair it just move along then

we know what really happened

Get a light 100w light bulb in there to start drying out the interior a leaf blower is an alternative disconnect the two connectors at the Ecu and examine for corrosion be a fine idea to examine all...

ok then...

for $500 you have some room and gave some good follow up on the basic diagnostic info

often when an ECU is bad it cannot communicate with the console and all sorts of weird things...

I read the article and loved the part where he was quoted saying he got his carry permit to protect his family. in CHICAGO

Not having a valid carry permit on your person while you have your...

not that unusual to find bolts that have backed out. good idea to go over everything on the ski however

a very wise move going with new con rods. good luck on your build

Unless you have some considerable watercraft experience, I'd suggest parting this ski out.

you bought an oak island special, and if you pursue this, you'll be pouring money into a hole in the...

Luckily there wasn’t an extra 10mm socket at that shop

One of the first things I was taught at the car dealership

Rag count

we got a bag of ten for every job bag had to be turned into...

shop rag went into the blower intake