Fiberglass repairs

  1. mfd
  2. Bondo used to fill in balance of imperfections.  Sand and prep for Plastidip finish.
  3. Screws removed
  4. Footwell plastidip applied for final finish
  5. Marine tex epoxy stick used to fill in on top of 1st layer of epoxy to level off with existing fiberglass surface
  6. Damaged area cut out with hole saw large enough to get 3/8" plywood backer in under both sides.  PL adhesive used to glue plywood to bottom of...
Showing pictures 1 to 5 of 5